3/4" Drive Retaining Ring 1-7/16" Groove
(Pack of
1)
SKU:1228524 Item#: 1228524
• Cracked sockets and or worn drive tools cause each other to turn excessively in relation to each other
• Designed with a resin crush gauge to help identify when to replace worn sockets
• Drive tool and socket should line up when in use and should not pinch the crush gauge
• One piece construction, no loose parts
• Pin is made of resin which allows the material to compress without breaking
• Retaining rings are used to help secure sockets onto drive tools
• The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced
• The rotational forces are between the drive tool and the socket
• They are not intended to bear any load
• This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced
Frequently Bought Together
Master Security Bit Set 203Pc
Couldn't load pickup availability
Razor Blade Single Edge w/Notch
Couldn't load pickup availability
Razor Blade, Single Edge, High Carbon Steel
Couldn't load pickup availability
1" Dr Retaining RingCush Ring 2-1/4"
Couldn't load pickup availability
Impact Retaining Ring, 3/4" Drive, 1-3/4"
Couldn't load pickup availability
Impact Retaining Ring, 3/4" Drive, 3/16" to 1-3/4"
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability
Push-Type Retainer Nylon 16 x 19mm
Couldn't load pickup availability
3/4" Drive Standard Impact Socket, 2-1/16"
Couldn't load pickup availability
3/8 Drive Bi-Pos Swivel Impact Socket, 11mm
Couldn't load pickup availability
3/8" Drive Deep Impact Socket, 15mm
Couldn't load pickup availability
Universal Socket Set, SAE, 3/8" Drive, 8pc
Couldn't load pickup availability
2.1 Round Head Ratchet 3/8 Drive 168 Tooth
Couldn't load pickup availability
Abrasive Hand Pad All Purpose 6 x 9"
Couldn't load pickup availability
Product Description
• Cracked sockets and or worn drive tools cause each other to turn excessively in relation to each other• Designed with a resin crush gauge to help identify when to replace worn sockets
• Drive tool and socket should line up when in use and should not pinch the crush gauge
• One piece construction, no loose parts
• Pin is made of resin which allows the material to compress without breaking
• Retaining rings are used to help secure sockets onto drive tools
• The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced
• The rotational forces are between the drive tool and the socket
• They are not intended to bear any load
• This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced
Technical Specifications
| Item#: | 1228524 |
|---|---|
| Type | Retaining Ring |
| Drive Size | 3/4 " |
| Length | 1.624 " |
| UPC | 662679978013 |
| Socket Groove Diameter | 1 7/16 " |
| UNSPSC #: | 27000000 |
| TAA Compliant: | Yes |
