3/4 Drop In Anchor Set Tool
(Pack of
1)
SKU:DY09620088 Item#: DY09620088
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.4. Place fixture in position, insert bolt and tighten.
Frequently Bought Together
Anchor Drill Bit Adapter for Installation Tool Kit
$0.00
Couldn't load pickup availability
Threaded Rod Anchor Hex Drive Socket 1/2"
$0.00
Couldn't load pickup availability
5/16" Drive Socket for 1/4" UltraCon Anchors
$0.00
Couldn't load pickup availability
Toggle Bolt Anchor Assortment 70Pcs
$0.00
Couldn't load pickup availability
Drill 'N Drive Masonry Anchor Assortment 283Pcs
$0.00
Couldn't load pickup availability
Standard Self-Drilling Wallboard Anchor Kit 41Pcs
$0.00
Couldn't load pickup availability
DIN 125A Flat Washer Grade 140 HV M8
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 16mm
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 30mm
$0.00
Couldn't load pickup availability
Drive Rivet Nylon M8
$0.00
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Bumper Radiator and Grille Drive Rivet 7mm Hole
$0.00
Couldn't load pickup availability
Product Description
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.4. Place fixture in position, insert bolt and tighten.Technical Specifications
| Item#: | DY09620088 |
|---|---|
| Type | Drop-In Anchor Setting Tool |
| Size | 3/4 " |
| Tool Size | 3/4 " |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 1.27 lb |
Product Restrictions
