3/8"X 50Ft Green Oxygen Hose
(Pack of
1.0)
This exothermic torch system operates on oxygen alone. The rod is ignited by a spark from a battery or welder. The oxygen reacts with the fuel rods to create a burning reaction hot enough to burn through almost any material. The oxygen jet then blows the molten material away. It will blast through steel, alloy steel, cast iron, manganese, hardfacing, stainless, aluminum, steel-reinforced concrete, composites, refractory brick and even rock.
Frequently Bought Together
Oxy-Therm Cutting Rod 1/4 x 36"
Couldn't load pickup availability
Oxy-Therm Cutting Rod 3/8 x 24"
Couldn't load pickup availability
Oxy-Therm Cutting Rod 1/4 x 24"
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
Couldn't load pickup availability
Fender Apron Drive Rivet 8mm Hole
Couldn't load pickup availability
Heat Stick 650F Degrees
Couldn't load pickup availability
Heat Stick 850F Degrees
Couldn't load pickup availability
Cap Whip-Lead Connector #4 to #1
Couldn't load pickup availability
9V TIG Welding Short Torch Cap
Couldn't load pickup availability
9V/HW20 TIG Welding Alumina Gas Lens Cup #6
Couldn't load pickup availability
Copper Contact Tip
Couldn't load pickup availability
Product Description
This exothermic torch system operates on oxygen alone. The rod is ignited by a spark from a battery or welder. The oxygen reacts with the fuel rods to create a burning reaction hot enough to burn through almost any material. The oxygen jet then blows the molten material away. It will blast through steel, alloy steel, cast iron, manganese, hardfacing, stainless, aluminum, steel-reinforced concrete, composites, refractory brick and even rock.Technical Specifications
| Item#: | EG79800040 |
|---|---|
| Type | Oxygen Hose |
| UNSPSC #: | 23271700 |
| TAA Compliant: | Yes |
| Weight: | 3.26 lb |
