Hand Tap Kit, High Speed Steel, Gold Oxide Finish, 3 Flute, Taper, Plug and Bottoming Style Taps, 5-44, 5/8" Thread Length
(Pack of
1)
SKU:61101 Item#: 61101
Lawson Tap Sets include Taper, Plug and Bottoming Style Taps; replacement taps are available in each style.
Taper Style
8 to 10 threads chamfered. For easy thread starting in tough materials.
Plug Style
3 to 5 threads chamfered. For general use when tapping to bottom of hole is not critical.
Bottoming Style
1-1/2 threads chamfered. Use after threads have been started for tapping to bottom of hole.
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Gold oxide finish enhances chip flow
• Minimizes seizing and binding
• Requires less torque
• Produces a more accurate hole
• Sizes permanently marked on all taps
• Manufactured from high-speed steel
• Wear-resistant
• Used in general tapping operations of ferrous and non-ferrous materials
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Sheet Metal Drill Bit Alloy Steel 5/32"
$0.00
Couldn't load pickup availability
Cryoslash 3-5/8" x 1/2" x 0.025" Air Saw Blade 32 TPI
$0.00
Couldn't load pickup availability
Stemmed Knot-Type Wire Wheel 3"
$0.00
Couldn't load pickup availability
4-Flute HSS Hand Tap Kit M16 x 2
$0.00
Couldn't load pickup availability
Cryotap 1/2"-13 Tri-Pak
$0.00
Couldn't load pickup availability
Cryotap M10 x 1.5 Metric Taper Hand Tap
$0.00
Couldn't load pickup availability
Fender and Bumper Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Hex Head Sheet Metal Screw with 16mm Washer Steel
$0.00
Couldn't load pickup availability
Air Distributor Defroster Push-Type Retainer
$0.00
Couldn't load pickup availability
Cryo-Drap #12-24 Drill & Tap Combo, 135o Split Point, W/Flats
$0.00
Couldn't load pickup availability
4-Flute HSS Taper Hand Tap 8-36
$0.00
Couldn't load pickup availability
3-Flute HSS Plug Hand Tap M2 x 0.4
$0.00
Couldn't load pickup availability
100 Piece, 1/4" Shank Master Bit Set
$0.00
Couldn't load pickup availability
7" Auto-Adjust Pliers
$0.00
Couldn't load pickup availability
2Pc Index-Tend Pry Bar Set
$0.00
Couldn't load pickup availability
Product Description
Lawson Tap Sets include Taper, Plug and Bottoming Style Taps; replacement taps are available in each style.Taper Style
8 to 10 threads chamfered. For easy thread starting in tough materials.
Plug Style
3 to 5 threads chamfered. For general use when tapping to bottom of hole is not critical.
Bottoming Style
1-1/2 threads chamfered. Use after threads have been started for tapping to bottom of hole.
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Gold oxide finish enhances chip flow
• Minimizes seizing and binding
• Requires less torque
• Produces a more accurate hole
• Sizes permanently marked on all taps
• Manufactured from high-speed steel
• Wear-resistant
• Used in general tapping operations of ferrous and non-ferrous materials
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 61101 |
|---|---|
| Type | Machine Screw |
| Style | Set |
| Material | High Speed Steel |
| Diameter | #5 |
| Pitch | 44 |
| Flutes | 3 |
| Thread Length | 5/8 " |
| H Limits | GH2 |
| Number of Pieces | 3 |
| Recommended Drill Size | No. 37 |
| Description | One each of Taper, Plug and Bottoming Style Taps |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.03 lb |
