Air Brake Hose, Rubber, 3/8" ID, 3/4" OD, 50' Length, 225PSI, SAE J1402, Type A
(Pack of
1)
SKU:83892 Item#: 83892
• Black synthetic rubber tube with neoprene cover
• Multi-spiral reinforcement
• Supplied in 50-foot rolls
• Easy to assemble, reusable hose ends
• Brass material offers excellent corrosion resistance
• Meets SAE Specification J1402
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Use on air brake hose lines
Assembly information
1. Slide nut and sleeve onto hose. Make sure bevel edge of sleeve faces out toward fitting.
2. Push hose into fitting until it bottoms.
3. Screw nut until contact is made with body hex.
Frequently Bought Together
PVF Steel Hydraulic Brake Lines 1/4" x 30"
$0.00
Couldn't load pickup availability
Stainless Steel Air Brake Tube Insert 5/8"
$0.00
Couldn't load pickup availability
PVF Steel Hydraulic Brake Lines 1/4" x 20"
$0.00
Couldn't load pickup availability
Hose Clamp 304 SS 3/4 to 1-3/4"
$0.00
Couldn't load pickup availability
Air Conditioning Slim Line Sealing Washer
$0.00
Couldn't load pickup availability
DOT Swivel Elbow Male 360° Brass 3/8 x 1/4-18
$0.00
Couldn't load pickup availability
Silicone Coolant/Heater Hose Clamp 13/16 to 1-3/4"
$0.00
Couldn't load pickup availability
Slotted Hex Head Hose Clamp 1-13/16 to 2-3/4"
$0.00
Couldn't load pickup availability
Silicone Coolant/Heater Hose Clamp 1/2 to 29/32"
$0.00
Couldn't load pickup availability
Slotted Hex Head Hose Clamp 301 SS 7/16 to 1"
$0.00
Couldn't load pickup availability
DOT Union Brass 1/4 x 1/4"
$0.00
Couldn't load pickup availability
Quick Disconnect Plug Brass 1/4" x 1/4-18
$0.00
Couldn't load pickup availability
Fender Bumper Shield Retainer 11/16"
$0.00
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
$0.00
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 7mm Hole
$0.00
Couldn't load pickup availability
Product Description
• Black synthetic rubber tube with neoprene cover• Multi-spiral reinforcement
• Supplied in 50-foot rolls
• Easy to assemble, reusable hose ends
• Brass material offers excellent corrosion resistance
• Meets SAE Specification J1402
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Use on air brake hose lines
Assembly information
1. Slide nut and sleeve onto hose. Make sure bevel edge of sleeve faces out toward fitting.
2. Push hose into fitting until it bottoms.
3. Screw nut until contact is made with body hex.
Technical Specifications
| Item#: | 83892 |
|---|---|
| Category / Performance | Air Brake Hose - Rubber |
| I.D. | 3/8 " |
| Size | 3/8-ID 3/4 |
| Industry Rating 1 | SAE J1402, Type A |
| Industry Rating 2 | DOT FMVSS 106 |
| Hose O.D. | 3/4 " |
| Dash Size | -6 |
| Working Pressure | 225 PSI |
| O.D. | 3/8 " |
| Burst Pressure | 900 PSI |
| Temperature | -40F to +200F |
| Hose Reinforcement | 4 Spiral Polyester Yarn |
| Hose Cover Material | EPDM, RMA Class C |
| Inner Tube Material | EPDM, RMA Class C |
| UNSPSC #: | 25171700 |
| TAA Compliant: | Yes |
| Weight: | 8.61 lb |
