Aligning Reamer, High Speed Steel, Gold Finish, Straight Shank, Right Hand Spiral Flute, 3-3/16" Flute Length, 1/2 x 4-1/2"
(Pack of
1)
SKU:86862 Item#: 86862
• Enter holes half their nominal diameter
• Special gold finish minimizes friction
• Three large flats for solid chucking
• Right-hand cut with left-hand flute to minimize pushback or grabbing
• 1/2" shank
NOTE: Always use slow turning drill motors of 4.5A or higher.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Aligning Reamer HSS 1"
$0.00
Couldn't load pickup availability
Cryocut 5/8" 5-Flute Reamer, 1/2" Shank
$0.00
Couldn't load pickup availability
Aligning Reamer HSS 13/16"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 3/8" (M10)
$0.00
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 3/16"
$0.00
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/4"
$0.00
Couldn't load pickup availability
Aligning Reamer HSS 1-1/16"
$0.00
Couldn't load pickup availability
Aligning Reamer HSS 1"
$0.00
Couldn't load pickup availability
Cryocut 5/8" 5-Flute Reamer, 1/2" Shank
$0.00
Couldn't load pickup availability
Engine Under Cover Drive Rivet Plastic 7mm Hole
$0.00
Couldn't load pickup availability
Cowl Bumper Fender Liner/Engine Under Cover Rivet
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 3/8" (M10)
$0.00
Couldn't load pickup availability
Cross-Over Socket Extension Set, 3/8" Drive, 3 Piece
$0.00
Couldn't load pickup availability
Utility Knife, Folding , 4" Closed
$0.00
Couldn't load pickup availability
Product Description
• Enter holes half their nominal diameter• Special gold finish minimizes friction
• Three large flats for solid chucking
• Right-hand cut with left-hand flute to minimize pushback or grabbing
• 1/2" shank
NOTE: Always use slow turning drill motors of 4.5A or higher.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 86862 |
|---|---|
| Type | Aligning |
| Material | High Speed Steel |
| Diameter | 1/2 " |
| Decimal Equivalent | 0.5000 " |
| Shank Type | Straight |
| Finish | Gold |
| Shank Size | 1/2 |
| Flats | 3 |
| Flute Type | Right Hand Spiral |
| Flute Length | 3-3/16 " |
| Pilot Drill Diameter | 1/4 |
| Material Thickness | 1-1/4 |
| Overall Length | 4-1/2 " |
| UNSPSC #: | 23241611 |
| TAA Compliant: | Yes |
| Weight: | 0.19 lb |
