Flap Disc, Use on Right Angle Grinders, Zirconium Grain, Aluminum Backing, Type 29, 7/8" Arbor, 60 Grit, 7" Diameter
(Pack of
1)
SKU:27994 Item#: 27994
• Two tools in one – grind and finish at the same time; no more switching from a Type 27 grinding wheel to a resin fiber sanding disc
• High-performance wheel cuts cleaner, cooler, faster, and lasts longer than conventional fiber-backed abrasive discs
• Reduced clogging, loading and glazing
• Zirconium grain – individual flaps, comprised of thick layers of high-tech zirconium abrasive cloth, are bonded to the backing plate. The layers are angled to suit the natural working angle of a grinder, so more abrasive makes contact with the work surface. As the layers slowly wear, more abrasive is exposed for a constant finish throughout disc life
• Much quieter than grinding discs
• No backing pad required
• Ideal for 15° – 25° working angle
• Aluminum backing provides extra strength, allowing for more aggressive grinding and better removal of material
• For use on portable right-angle grinders
• Suitable for use on a wide variety of materials, including stainless steel
• Use for stock and weld removal, blending and dressing on truck and bus bodies, in shipbuilding and repair applications, on farm machinery and equipment, in fabricated structural metal and plate work, and in sheet metal work
Preminum use for all steel materials and welds
IMPORTANT: If you are currently using a resin fiber grinding disc, you should order your Blue-Kote Flap Disc one to two grits coarser to obtain a similar finish.
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Frequently Bought Together
Spot Weld Remover Drill Bit
$0.00
Couldn't load pickup availability
Abrasive Bristle Wire Belt Steel 23mm
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
Aluminum Oxide Grain Locking Grinding Disc 2"
$0.00
Couldn't load pickup availability
Zirconium Grain Locking Grinding Disc 2"
$0.00
Couldn't load pickup availability
Aluminum Oxide Grain Locking Grinding Disc 3"
$0.00
Couldn't load pickup availability
Flexible Flap Disc 4-1/2"
$0.00
Couldn't load pickup availability
Mini Flap Disc 2"
$0.00
Couldn't load pickup availability
Aluminum Backing Plate Flap Disc 5"
$0.00
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
$0.00
Couldn't load pickup availability
Mini-Hole Saw Kit
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
$0.00
Couldn't load pickup availability
100 Piece, 1/4" Shank Master Bit Set
$0.00
Couldn't load pickup availability
Product Description
• Two tools in one – grind and finish at the same time; no more switching from a Type 27 grinding wheel to a resin fiber sanding disc• High-performance wheel cuts cleaner, cooler, faster, and lasts longer than conventional fiber-backed abrasive discs
• Reduced clogging, loading and glazing
• Zirconium grain – individual flaps, comprised of thick layers of high-tech zirconium abrasive cloth, are bonded to the backing plate. The layers are angled to suit the natural working angle of a grinder, so more abrasive makes contact with the work surface. As the layers slowly wear, more abrasive is exposed for a constant finish throughout disc life
• Much quieter than grinding discs
• No backing pad required
• Ideal for 15° – 25° working angle
• Aluminum backing provides extra strength, allowing for more aggressive grinding and better removal of material
• For use on portable right-angle grinders
• Suitable for use on a wide variety of materials, including stainless steel
• Use for stock and weld removal, blending and dressing on truck and bus bodies, in shipbuilding and repair applications, on farm machinery and equipment, in fabricated structural metal and plate work, and in sheet metal work
Preminum use for all steel materials and welds
IMPORTANT: If you are currently using a resin fiber grinding disc, you should order your Blue-Kote Flap Disc one to two grits coarser to obtain a similar finish.
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 27994 |
|---|---|
| Type | Standard |
| Diameter | 7 " |
| Wheel Type | 29 |
| Grit | 60 |
| Arbor Size | 7/8 " |
| Grain | Zirconium |
| Maximum RPM | 8,600 |
| Backing | Aluminum |
| Aluminum Approved | Yes |
| UNSPSC #: | 31191506 |
| TAA Compliant: | Yes |
| Weight: | 0.8 lb |
