Chucking Reamer, Cobalt, Straight Shank, Straight Flute, 0.5415" Diameter
(Pack of
1)
SKU:1290235 Item#: 1290235
These high-quality reamers are designed for most standard needs.
Reamers are made to a plus tolerance.
Get up to 500% increased tool life through the use of cobalt steel. Get more accurate, better-finished holes from a unique process of flute-grinding and close diameter tolerances. Because of the higher red hardness factor of cobalt steel, these reamers can be run approximately 25% faster than regular high-speed steel reamers.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Chucking Reamer Cobalt 3/8"
Couldn't load pickup availability
Chucking Reamer HSS 1/8"
Couldn't load pickup availability
Chucking Reamer HSS 3/4 "
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
Aluminum Oxide Grain Locking Grinding Disc 2"
Couldn't load pickup availability
Zirconium Grain Locking Grinding Disc 2"
Couldn't load pickup availability
Chucking Reamer Cobalt 3/4"
Couldn't load pickup availability
Aligning Reamer HSS 3/8"
Couldn't load pickup availability
Cryo Step Reamer, 13/16", 7/8", 15/16", 1", 1-1/16", 3/8" Shank
Couldn't load pickup availability
Push-Type Retainer Nylon 16 x 19mm
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
2.1 Round Head Ratchet 3/8 Drive 168 Tooth
Couldn't load pickup availability
Abrasive Hand Pad All Purpose 6 x 9"
Couldn't load pickup availability
21-Piece, 1/4" Shank, 2" Hex Power Bit Set
Couldn't load pickup availability
Product Description
These high-quality reamers are designed for most standard needs.Reamers are made to a plus tolerance.
Get up to 500% increased tool life through the use of cobalt steel. Get more accurate, better-finished holes from a unique process of flute-grinding and close diameter tolerances. Because of the higher red hardness factor of cobalt steel, these reamers can be run approximately 25% faster than regular high-speed steel reamers.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 1290235 |
|---|---|
| Reamer Type | Intermediate Size |
| Type | Chucking |
| Material | Cobalt |
| Diameter | 0.5415 " |
| Decimal Equivalent | .5415 " |
| Shank Type | Straight |
| Flute Type | Straight |
| UNSPSC #: | 23241611 |
| TAA Compliant: | Yes |
