Chucking Reamer, Cobalt, Straight Shank, Straight Flute, 2-1/4" Flute Length, 5/8 x 9"
(Pack of
1)
SKU:1290283 Item#: 1290283
These high-quality reamers are designed for most standard needs.
Reamers are made to a plus tolerance.
Get up to 500% increased tool life through the use of cobalt steel. Get more accurate, better-finished holes from a unique process of flute-grinding and close diameter tolerances. Because of the higher red hardness factor of cobalt steel, these reamers can be run approximately 25% faster than regular high-speed steel reamers.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Chucking Reamer HSS 0.156"
Couldn't load pickup availability
Chucking Reamer Cobalt 3/8"
Couldn't load pickup availability
Chucking Reamer HSS 1/8"
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
Couldn't load pickup availability
Aluminum Oxide Grain Locking Grinding Disc 2"
Couldn't load pickup availability
Abrasive Bristle Wire Belt Steel 23mm
Couldn't load pickup availability
Chucking Reamer HSS 0.194"
Couldn't load pickup availability
Chucking Reamer Cobalt 3/4"
Couldn't load pickup availability
Aligning Reamer HSS 3/8"
Couldn't load pickup availability
Bumper Radiator and Grille Drive Rivet 7mm Hole
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
Couldn't load pickup availability
Woven Polyester Electrical Tape 19mm x 25m
Couldn't load pickup availability
Abrasive Hand Pad All Purpose 6 x 9"
Couldn't load pickup availability
Nutsetter & Bit Set, Magnetic, 22pc
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/4"
Couldn't load pickup availability
Product Description
These high-quality reamers are designed for most standard needs.Reamers are made to a plus tolerance.
Get up to 500% increased tool life through the use of cobalt steel. Get more accurate, better-finished holes from a unique process of flute-grinding and close diameter tolerances. Because of the higher red hardness factor of cobalt steel, these reamers can be run approximately 25% faster than regular high-speed steel reamers.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 1290283 |
|---|---|
| Reamer Type | Fractional |
| Type | Chucking |
| Material | Cobalt |
| Diameter | 5/8 " |
| Decimal Equivalent | .6250 " |
| Shank Type | Straight |
| Shank Size | .5620 " |
| Flute Type | Straight |
| Flute Length | 2-1/4 |
| Overall Length | 9 " |
| UNSPSC #: | 23241611 |
| TAA Compliant: | Yes |
