Cobalt End Mill, 4 Flute, Single End, Coarse Rougher, TiN Finish, 7/8" Diameter, 1-7/8" Cutting Length, 4-1/8" Overall Length
(Pack of
1)
SKU:14859 Item#: 14859
• M42 tool steel with an 8% cobalt content for long tool life and high heat and abrasion resistance for tough machining applications
• Made in USA
• TiN coating (Titanium Nitride) is ideal for a wide range of applications and cutting conditions where tool life and higher feeds and speeds are operating objectives
• High lubricity of TiN facilitates chip flow, prevents buildup and reduces cutting forces and temperature
• TiN reduces wear and improves chip formation to extend tool life
• Due to the sinusoidal form on cutting edge, small chips are produced which allow faster feed rates than conventional end mills. A rough finish is produced which will require a finishing pass
• Used in difficult and abrasive materials and tough alloy materials such as stainless steel, nickel base alloy, brass and iron
NOTE: Item Nos. 14859 and 14860 have five flutes.
End Mill Selection: Harder workpieces require a higher number of flutes. Softer material requires fewer flutes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Sheet Metal Drill Bit Alloy Steel 5/32"
$0.00
Couldn't load pickup availability
Twist-On Abrasive Disc 2"
$0.00
Couldn't load pickup availability
Eraser Disc Natural Tan 4 x 1"
$0.00
Couldn't load pickup availability
Solid Carbide End Mill 4 Flute Single End 3/32"
$0.00
Couldn't load pickup availability
Solid Carbide End Mill 4 Flute Single End 3/4"
$0.00
Couldn't load pickup availability
CryoNitride 5/16" Dia. End Mill, 2-Flute, Single End, Center Cut
$0.00
Couldn't load pickup availability
Cobalt End Mill 4 Flute Single End 7/16"
$0.00
Couldn't load pickup availability
Cobalt End Mill 4 Flute Single End 3/16"
$0.00
Couldn't load pickup availability
Front Bumper and Radiator Support Drive Rivet
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Fender and Bumper Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
2Pc Index-Tend Pry Bar Set
$0.00
Couldn't load pickup availability
Double Flute Step Drill Bit 1/8 to 1/2"
$0.00
Couldn't load pickup availability
Alu-Master 8-Way Torpedo Level
$0.00
Couldn't load pickup availability
Product Description
• M42 tool steel with an 8% cobalt content for long tool life and high heat and abrasion resistance for tough machining applications• Made in USA
• TiN coating (Titanium Nitride) is ideal for a wide range of applications and cutting conditions where tool life and higher feeds and speeds are operating objectives
• High lubricity of TiN facilitates chip flow, prevents buildup and reduces cutting forces and temperature
• TiN reduces wear and improves chip formation to extend tool life
• Due to the sinusoidal form on cutting edge, small chips are produced which allow faster feed rates than conventional end mills. A rough finish is produced which will require a finishing pass
• Used in difficult and abrasive materials and tough alloy materials such as stainless steel, nickel base alloy, brass and iron
NOTE: Item Nos. 14859 and 14860 have five flutes.
End Mill Selection: Harder workpieces require a higher number of flutes. Softer material requires fewer flutes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 14859 |
|---|---|
| Material | M42 |
| Finish | TiN |
| Center Cutting | No |
| Cutting Diameter | 7/8 " |
| Cutting Length | 1-7/8 " |
| Flutes | 5 |
| Shank Size | 7/8 " |
| Overall Length | 4-1/8 " |
| UNSPSC #: | 27112803 |
| TAA Compliant: | Yes |
| Weight: | 0.6 lb |
