Cold Shrink Tubing, 500 to 800 MCM, Black, 1.94" ID Before and 0.95" ID After Shrinkage, 6" Length
(Pack of
1)
SKU:29170 Item#: 29170
• Does not require heat to install – remove (unwind) the plastic core and tubing will shrink to seal the connection
• Safe and simple – perfect for installations where heat or flame can’t be used
• EPDM rubber seals tight and retains resiliency and pressure on the connection
• Water-resistant – meets ANSI C119.1 water seal requirements
• Use as primary insulation on solid rubber and plastic-insulated wire and cable; rated to 1,000V
• Use for physical protection and as a moisture seal for couplings, hoses, connections and terminal lugs
• For cable jacket and sheath repairs
Note: Do not cut the length of the tubing. It is intended to be used full length.
Frequently Bought Together
Cold Shrink Tubing 2/0 to 250 MCM Black
$0.00
Couldn't load pickup availability
Rechargeable Neck Light
$0.00
Couldn't load pickup availability
Butt Connector 22 to 24 AWG Clear
$0.00
Couldn't load pickup availability
Master Series Handheld Flashlight
$0.00
Couldn't load pickup availability
Rocker Door and Exterior Molding Retainer
$0.00
Couldn't load pickup availability
Phillips Truss Head Sheet Metal Screw Steel 15mm
$0.00
Couldn't load pickup availability
Front Bumper Specialty Nut Steel M4.2-1.41
$0.00
Couldn't load pickup availability
Super 88 Series Vinyl Electrical Tape Black 3/4"
$0.00
Couldn't load pickup availability
Rubber Grommet 5/8" ID
$0.00
Couldn't load pickup availability
Split Wire Loom Polyethylene Black 0.75" ID 25'
$0.00
Couldn't load pickup availability
Product Description
• Does not require heat to install – remove (unwind) the plastic core and tubing will shrink to seal the connection• Safe and simple – perfect for installations where heat or flame can’t be used
• EPDM rubber seals tight and retains resiliency and pressure on the connection
• Water-resistant – meets ANSI C119.1 water seal requirements
• Use as primary insulation on solid rubber and plastic-insulated wire and cable; rated to 1,000V
• Use for physical protection and as a moisture seal for couplings, hoses, connections and terminal lugs
• For cable jacket and sheath repairs
Note: Do not cut the length of the tubing. It is intended to be used full length.
Technical Specifications
| Item#: | 29170 |
|---|---|
| Wire Gauge Coverage | 500-800kcmil |
| I.D. Before Shrinkage | 1.94 " |
| I.D. After Shrinkage | 0.95 " |
| Length | 6 " |
| Voltage | 1000 V |
| Approvals | Meets ANSI C119.1 water seal requirements |
| Style | Cold shrink tubing |
| Type | Torches and cold shrink tubing |
| UNSPSC #: | 40183000 |
| TAA Compliant: | Yes |
| Weight: | 0.26 lb |
