Combination Overdriver Sleeve for 6, 8, 10 and 12 Screw Diameter, Use with 1/4" Hex Shank Products
(Pack of
1)
SKU:52099 Item#: 52099
• Drill and drive in one easy step
• Fits all power drills
• For Nos. 6, 8, 10 and 12 screw dia.
• Use with 1/4" Hex Shank products
1. Drill hole
2. Install sleeve over drill bit
3. Drive screw
NOTE: Install screwdriver bit in sleeve before drilling.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Scotch-Brite Roloc Bristle Disc 2"
$0.00
Couldn't load pickup availability
Polymer Wheel Rubber Eraser 30mm
$0.00
Couldn't load pickup availability
Cryoslash 3-5/8" x 1/2" x 0.025" Air Saw Blade 24 TPI
$0.00
Couldn't load pickup availability
Cryobit Drill Bit T Bit Stubby
$0.00
Couldn't load pickup availability
Cryobit #21 Dia. T-Bit, 2-1/8" Long Shank Length, 1/4"-28 Thread
$0.00
Couldn't load pickup availability
Cryobit #30 Dia. T-Bit, 1-1/4" Short Shank Length, 1/4"-28 Thread,Bulk
$0.00
Couldn't load pickup availability
Reinforced Mini Cut-Off Wheel 4"
$0.00
Couldn't load pickup availability
Reinforced Mini Cut-Off Wheel 2"
$0.00
Couldn't load pickup availability
Cut-Off Wheel, 3" X 1/32" X 3/8", Aluminum Oxide, Type 1
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Fender Bumper Shield Retainer 11/16"
$0.00
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
$0.00
Couldn't load pickup availability
1/4" - 3/4" Cryonitride Spiral Fluted Step Drill - 3/8" Shank
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
$0.00
Couldn't load pickup availability
Hinge Pin and Bushing Kit 4 Items 7Pcs
$0.00
Couldn't load pickup availability
Bumper and Lower Deflector Specialty Rivet 4.8mm
$0.00
Couldn't load pickup availability
Rocker and Quarter Molding Retainer Plastic
$0.00
Couldn't load pickup availability
Hinge Pin and Bushing Kit 4 Items 7Pcs
$0.00
Couldn't load pickup availability
Bumper and Lower Deflector Specialty Rivet 4.8mm
$0.00
Couldn't load pickup availability
Rocker and Quarter Molding Retainer Plastic
$0.00
Couldn't load pickup availability
Product Description
• Drill and drive in one easy step• Fits all power drills
• For Nos. 6, 8, 10 and 12 screw dia.
• Use with 1/4" Hex Shank products
1. Drill hole
2. Install sleeve over drill bit
3. Drive screw
NOTE: Install screwdriver bit in sleeve before drilling.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 52099 |
|---|---|
| UNSPSC #: | 27111701 |
| TAA Compliant: | Yes |
| Weight: | 0.0661 lb |
