Screw Extractor, Removes Stripped-Out and Damaged Screws Quickly and Easily, Reusable, #2, Number 6 to 10
(Pack of
1)
SKU:63213 Item#: 63213
• Reusable – just clean off chips and lubricate
• Removes stripped-out and damaged screws quickly and easily
• Removes most screw types including Phillips, TORX®, square drive, Pozidriv® and most tamper-proof screws
• For use in variable speed hand drills set in reverse
Burnishing:1. Insert remover end of GRABIT® directly into drill.2. Set drill in reverse (counterclockwise).3. Place burnishing end of tool into damaged screw; slowly clean inside screw head until smooth.Removing:1. Insert burnishing end of GRABIT® directly into drill; removing end is now showing.2. Maintain reverse setting (counterclockwise).3. Place remover end of tool into smooth screw head.4. Apply firm downward pressure; drill at very low speed.5. Remover end of GRABIT® will thread into the head and remove the screw.
NOTE: Burnishing tool end is not to be used to drill holes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Twist-On Abrasive Disc 2"
Couldn't load pickup availability
Polymer Wheel Rubber Eraser 30mm
Couldn't load pickup availability
Aluminum Oxide Grain Locking Grinding Disc 2"
Couldn't load pickup availability
Standard Flute Screw Extractor 7/16"
Couldn't load pickup availability
Standard Flute Screw Extractor 3/8"
Couldn't load pickup availability
Standard Flute Screw Extractor 1/4"
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
Couldn't load pickup availability
Universal External Thread Repair 11/16 to 1-1/2"
Couldn't load pickup availability
Universal External Thread Repair 5/32 to 11/16"
Couldn't load pickup availability
Universal External Thread Repair Kit 2Pcs
Couldn't load pickup availability
Universal Socket Set, SAE, 3/8" Drive, 8pc
Couldn't load pickup availability
2.1 Round Head Ratchet 3/8 Drive 168 Tooth
Couldn't load pickup availability
Twist-On Abrasive Disc 2"
Couldn't load pickup availability
Product Description
• Reusable – just clean off chips and lubricate• Removes stripped-out and damaged screws quickly and easily
• Removes most screw types including Phillips, TORX®, square drive, Pozidriv® and most tamper-proof screws
• For use in variable speed hand drills set in reverse
Burnishing:1. Insert remover end of GRABIT® directly into drill.2. Set drill in reverse (counterclockwise).3. Place burnishing end of tool into damaged screw; slowly clean inside screw head until smooth.Removing:1. Insert burnishing end of GRABIT® directly into drill; removing end is now showing.2. Maintain reverse setting (counterclockwise).3. Place remover end of tool into smooth screw head.4. Apply firm downward pressure; drill at very low speed.5. Remover end of GRABIT® will thread into the head and remove the screw.
NOTE: Burnishing tool end is not to be used to drill holes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 63213 |
|---|---|
| Type | Screw Remover |
| Industry Number | 2 |
| For Sizes | No. 6 - No. 10 |
| UNSPSC #: | 27111709 |
| TAA Compliant: | No |
| Weight: | 0.04 lb |
