Fiberglass Paint Booth Filter Roll 20.5" x 100'
(Pack of 1)

Kent Automotive

Exhaust filters ensure the air leaving the spray booth is safe, and keeps paints and coatings from escaping. These filters are long-lasting and very efficient for all automotive paints and coatings. Changing the filters every two weeks is recommended to help prevent clogged filters, which can lead to overspray, and keeping paint from leaving the booth.
• High particle removal efficiency (over 99%)
• High overspray removal efficiency
• Great for waterborne coating applications
• Maximum filter longevity and holding capacity
• Maintains consistent air flow and booth balance
• 2.5" fiber structure and design
• 18g filter density
Meets or exceeds EPA Standard 40 CFR Part 63

Check Availability

Quantity

Frequently Bought Together

Molding Clip with Sealer Nylon White 11.5 x 21

Fender Splash Shield Retainer Nylon 20mm

Rivet Nylon 1/4"

Fiberglass Paint Booth Filter Pad

Fiberglass Paint Booth Filter Roll

Fiberglass Paint Booth Filter Roll

Double Flute Step Drill Bit 3/16 to 7/8"

Double Flute Step Drill Bit 1/4" to 1"

Double Flute Step Drill Bit 1/8 to 1/2"

Fender Splash Shield Retainer Nylon 20mm

Rivet Nylon 1/4"

Metric Indented Hex Head Bolt with 17mm Washer

9178NFO Cut Resistant Gloves

Quick Seal Sprayable Seam Sealer Grey 10.3fl.oz

Zinc-Rich Weld-Through Primer

Front Fender Push-Type Retainer Nylon 18mm

Miniature Incandescent Bulb 12V 2CP

Front Bumper Drive Rivet Plastic 10mm Hole

Fiberglass Paint Booth Filter Pad

Fiberglass Paint Booth Filter Roll

Fiberglass Paint Booth Filter Roll

Product Description

Exhaust filters ensure the air leaving the spray booth is safe, and keeps paints and coatings from escaping. These filters are long-lasting and very efficient for all automotive paints and coatings. Changing the filters every two weeks is recommended to help prevent clogged filters, which can lead to overspray, and keeping paint from leaving the booth.
• High particle removal efficiency (over 99%)
• High overspray removal efficiency
• Great for waterborne coating applications
• Maximum filter longevity and holding capacity
• Maintains consistent air flow and booth balance
• 2.5" fiber structure and design
• 18g filter density
Meets or exceeds EPA Standard 40 CFR Part 63

Technical Specifications

Item#:	1636263
Type	Roll
Material	Fiberglass
Size	20.5" x 100'
Thickness	2.5 "
UNSPSC #:	40161524
TAA Compliant:	No
Weight:	9.0 lb

Suggested Products

Rear Bumper Cover Retainer Plastic 18mm

Bumper and Wheel Well Liner Push-Type Retainer

Engine Under Cover Drive Rivet Plastic 7mm Hole

Bumper Fascia General Purpose Split Rivet 3/16"

Fender Apron Drive Rivet 8mm Hole

Front Fender Push-Type Retainer Nylon 20mm

Fender Bumper Shield Retainer 11/16"

Drive Rivet Nylon M8

Woven Polyester Electrical Tape 19mm x 25m

Inner Fender Shield Attaching Clip Nylon Black

Bumper Radiator and Grille Drive Rivet 7mm Hole

Cowl Bumper Fender Liner/Engine Under Cover Rivet

Your Recently Viewed Items