Flap Band 1-1/4"
(Pack of
1)
Multiple flaps of high-quality abrasive cloth layered onto a circular base. This design significantly increases the amount of material being used, for longer flap band life. The overlapping flaps and zirconium grain grind cooler. As the flaps wear away, fresh grain is exposed, resulting in a constant rate of stock removal and consistent scratch pattern throughout the life of the product.
• Zirconium grain
• One-step grinding and finishing
• Very aggressive stock removal
• For use on a die grinder
Applications:
• Finishing weld seams
• Deburring
• Rust and scale removal
• Grinding at 90° angle
• Blending irregular shapes and inside radii
NOTE: Rubber drum is required.
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Frequently Bought Together
Premium Ceramic Grinding Disk 7"
Couldn't load pickup availability
Unitized Mounted Point 1/2"
Couldn't load pickup availability
Unitized Mounted Point 1/4"
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
E-Z Kut Reinforced Abrasive Wheel 3"
Couldn't load pickup availability
Reinforced Mini Cut-Off Wheel 3"
Couldn't load pickup availability
3/4" Dia. X 3/8" Wide, Flap Wheel 120 Grit 1/8" Shank
Couldn't load pickup availability
2" Dia. X 1" Wide, Flap Wheel, 60 Grit, 1/4" Shank
Couldn't load pickup availability
Mounted Mini Flap Wheel 3/4"
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Front Fender Liner Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability
Razor Blade Single Edge w/Notch
Couldn't load pickup availability
Nutsetter & Bit Set, Magnetic, 22pc
Couldn't load pickup availability
8Pc Metric Flare Nut Wrench Set
Couldn't load pickup availability
Product Description
Multiple flaps of high-quality abrasive cloth layered onto a circular base. This design significantly increases the amount of material being used, for longer flap band life. The overlapping flaps and zirconium grain grind cooler. As the flaps wear away, fresh grain is exposed, resulting in a constant rate of stock removal and consistent scratch pattern throughout the life of the product.• Zirconium grain
• One-step grinding and finishing
• Very aggressive stock removal
• For use on a die grinder
Applications:
• Finishing weld seams
• Deburring
• Rust and scale removal
• Grinding at 90° angle
• Blending irregular shapes and inside radii
NOTE: Rubber drum is required.
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 28099 |
|---|---|
| Type | Flap Band |
| Diameter | 1-1/4 " |
| Width | 3/4 " |
| Grit | 60 |
| Maximum RPM | 26,000 |
| Grain | Zirconium |
| Aluminum Approved | Yes |
| UNSPSC #: | 31191507 |
| TAA Compliant: | Yes |
| Weight: | 0.03 lb |
Product Restrictions
