Flap Band 1-3/4"
(Pack of
1.0)
Multiple flaps of high-quality abrasive cloth layered onto a circular base. This design significantly increases the amount of material being used, for longer flap band life. The overlapping flaps and zirconium grain grind cooler. As the flaps wear away, fresh grain is exposed, resulting in a constant rate of stock removal and consistent scratch pattern throughout the life of the product.
Zirconium grain
One-step grinding and finishing
Very aggressive stock removal
For use on a die grinder
Applications:
Finishing weld seams
Deburring
Rust and scale removal
Grinding at 90° angle
Blending irregular shapes and inside radii
NOTE: Rubber drum is required.
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Frequently Bought Together

Premium Ceramic Grinding Disk 7"
Couldn't load pickup availability

Unitized Mounted Point 1/2"
Couldn't load pickup availability

Unitized Mounted Point 1/4"
Couldn't load pickup availability

Polymer Wheel Rubber Eraser 30mm
Couldn't load pickup availability

Spot Weld Remover Drill Bit HSS 2-3/4" (M8)
Couldn't load pickup availability

Cryobit 1/8" Dia. Maintenance Drill Bit , 135o Split Point, No Flats
Couldn't load pickup availability

Flap Wheel 2-1/2"
Couldn't load pickup availability

Mounted Flap Wheel 3"
Couldn't load pickup availability

3/4" Dia. X 3/8" Wide, Flap Wheel 120 Grit 1/8" Shank
Couldn't load pickup availability

Waterproof Work Aqua Light 66 LED
Couldn't load pickup availability

Cowl Bumper Fender Liner/Engine Under Cover Rivet
Couldn't load pickup availability

Bumper Radiator and Grille Drive Rivet 7mm Hole
Couldn't load pickup availability

Nutsetter & Bit Set, Magnetic, 22pc
Couldn't load pickup availability

Twist-On Abrasive Disc 2"
Couldn't load pickup availability

Sheet Metal Drill Bit Alloy Steel 1/4"
Couldn't load pickup availability
Product Description
Multiple flaps of high-quality abrasive cloth layered onto a circular base. This design significantly increases the amount of material being used, for longer flap band life. The overlapping flaps and zirconium grain grind cooler. As the flaps wear away, fresh grain is exposed, resulting in a constant rate of stock removal and consistent scratch pattern throughout the life of the product. Zirconium grain
One-step grinding and finishing
Very aggressive stock removal
For use on a die grinder
Applications:
Finishing weld seams
Deburring
Rust and scale removal
Grinding at 90° angle
Blending irregular shapes and inside radii
NOTE: Rubber drum is required.
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
Item#: | 28101 |
---|---|
Type | Flap Band |
Diameter | 1-3/4 " |
Width | 1-3/16 " |
Grit | 40 |
Maximum RPM | 19,100 |
Grain | Zirconium |
Aluminum Approved | Yes |
UNSPSC #: | 31191507 |
TAA Compliant: | Yes |
Weight: | 0.06 lb |
Product Restrictions



