Flexible Flap Disc 4-1/2"
(Pack of
1)
Zirconium grain, phenolic backing
Pointed flap configuration extending from the backing plate is excellent for accessing tight 90° corners and hard-to-reach areas
Overlapping flap construction promotes resistance to edge wear
Controlled breakdown of abrasive cloth and continual exposure of new grains allows consistent aggression throughout the disc life
4-1/2" discs have a phenolic backing
Ideal for use on contoured and irregular surfaces
Preminum use for all steel materials and welds
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Frequently Bought Together

Ceramic Grain Mini Cut-Off Wheel 3"
Couldn't load pickup availability

Mounted Flap Wheel 1"
Couldn't load pickup availability

Abrasive Hand Pad Light Duty 6 x 9"
Couldn't load pickup availability

Aluminum Oxide Grain Resin Fiber Disc 5"
Couldn't load pickup availability

Mini Flap Disc 3"
Couldn't load pickup availability

Flexible Flap Disc 4-1/2"
Couldn't load pickup availability

Z-Disk II Plus HC 2" Dia., 80 Grit, Roll Lock Mount, Zirconia Alumina
Couldn't load pickup availability

Z-Disk HP 4-1/2" Dia., 5/8"-11 Arbor, 120 Grit, Zirconia Alumina Grain
Couldn't load pickup availability

Z-Disk CO 4-1/2" Dia., 7/8" Arbor 80 Grit, Ceramic Oxide
Couldn't load pickup availability

Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability

Fender Splash Shield Retainer Nylon 20mm
Couldn't load pickup availability

Push-Type Retainer Nylon 20mm
Couldn't load pickup availability

Air Saw Blade 4" 32TPI
Couldn't load pickup availability

18" Locking Smooth Operator Clamp
Couldn't load pickup availability

Reinforced Mini Cut-Off Wheel 3"
Couldn't load pickup availability
Product Description
Zirconium grain, phenolic backing Pointed flap configuration extending from the backing plate is excellent for accessing tight 90° corners and hard-to-reach areas
Overlapping flap construction promotes resistance to edge wear
Controlled breakdown of abrasive cloth and continual exposure of new grains allows consistent aggression throughout the disc life
4-1/2" discs have a phenolic backing
Ideal for use on contoured and irregular surfaces
Preminum use for all steel materials and welds
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
Item#: | 26775 |
---|---|
Type | Flexible |
Diameter | 4-1/2 " |
Wheel Type | 27 |
Grit | 60 |
Arbor Size | 5/8-11 " |
Grain | Zirconium |
Maximum RPM | 13,300 |
Backing | Phenolic |
Aluminum Approved | Yes |
UNSPSC #: | 31191506 |
TAA Compliant: | Yes |
Weight: | 0.31 lb |
Product Restrictions


