High Solids Engine Paints Ford Motorcraft Blue
(Pack of
1.0)
Provides the bet coverage and finish performance in the aerosol paint industry.
Lawson’s High Solids save money with the lowest cost-per-square-foot coverage.
Best Performance
In a side-by-side comparison, Lawson’s formulations exceed solids content found in top-of-the-line popular brands. This gives High Solids the best coverage and finish performance in the aerosol paint industry!
Fewer Cans Needed to Do a Job!
Lawson’s High Solids also give you increased coverage per can, reducing the number of cans needed to do a job. Typical low solids paint brands often require up to four 16 oz. cans to provide coverage that one 20 oz. can of Lawson High Solids paint affords you!
• Wide color selection
• Labor-saving: Often just one coat will do!
• Tough: Passes 150-hour salt-spray test; beats top brands in gloss retention and fade resistance
Engine Paints – 20 oz. can size; 15 oz. net wt. (1509150 – 20 oz. can size; 16 oz. net wt.) Available in package quantities of 1, 3 and 12
• Heat-resistant up to 250°F (121°C); engine paints up to 350°F (177°C); high-temperature up to 1,200°F (649°C)
For automotive/truck engine rebuilding, repair and restoration, fleet maintenance and high-performance automotive applications.
NOTE: Actual colors may vary in shade from colors shown here, since these are ink reproductions.
Play it Safe! Wear safety glasses whenever spray painting.
Couldn't load pickup availability
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
Catalog page#: 1-37
Frequently Bought Together
High Solids Paints American Airlines Blue
Couldn't load pickup availability
High Solids Paint Genie Lift Blue
Couldn't load pickup availability
RUST-OLEUM Flat Black Aerosol Paint
Couldn't load pickup availability
Rusty™ 3000 Brake Plate/High Temperature Lubricant
Couldn't load pickup availability
Super Bond™ Instant Adhesive Black 1oz
Couldn't load pickup availability
DTM High Build Seam Sealer with Turbo Mixer
Couldn't load pickup availability
DTM Primer White
Couldn't load pickup availability
Liquid Vinyl Tape 4fl.oz
Couldn't load pickup availability
Euro-Black™ Gloss Finish 15oz
Couldn't load pickup availability
Wheel House Molding Split Rivet Aluminum 3/16"
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Product Description
Provides the bet coverage and finish performance in the aerosol paint industry.Lawson’s High Solids save money with the lowest cost-per-square-foot coverage.
Best Performance
In a side-by-side comparison, Lawson’s formulations exceed solids content found in top-of-the-line popular brands. This gives High Solids the best coverage and finish performance in the aerosol paint industry!
Fewer Cans Needed to Do a Job!
Lawson’s High Solids also give you increased coverage per can, reducing the number of cans needed to do a job. Typical low solids paint brands often require up to four 16 oz. cans to provide coverage that one 20 oz. can of Lawson High Solids paint affords you!
• Wide color selection
• Labor-saving: Often just one coat will do!
• Tough: Passes 150-hour salt-spray test; beats top brands in gloss retention and fade resistance
Engine Paints – 20 oz. can size; 15 oz. net wt. (1509150 – 20 oz. can size; 16 oz. net wt.) Available in package quantities of 1, 3 and 12
• Heat-resistant up to 250°F (121°C); engine paints up to 350°F (177°C); high-temperature up to 1,200°F (649°C)
For automotive/truck engine rebuilding, repair and restoration, fleet maintenance and high-performance automotive applications.
NOTE: Actual colors may vary in shade from colors shown here, since these are ink reproductions.
Play it Safe! Wear safety glasses whenever spray painting.
Technical Specifications
| Item#: | 1509169 |
|---|---|
| Type | High Solids Paint |
| Container Type | Aerosol |
| Size | 15 Oz. |
| Basic Color | Blue |
| Color | Ford Motorcraft Blue |
| Application Temperature | 50 to 90 °F |
| Dry Time (To Touch) | 10 min |
| Dry Time (Tack Free) | 30 min |
| Physical Form | Aerosol |
| Cure/Recoat Time | For best results recoat within 1 hour or after 48 hours. |
| UNSPSC #: | 31211500 |
| TAA Compliant: | Yes |
| Weight: | 1.22 lb |
Product Restrictions
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
