High Solids Paints, Flat White, 16oz Aerosol
(Pack of
1)
SKU:1509160 Item#: 1509160
Provides the best coverage and finish performance in the aerosol paint industry.
Lawson’s High Solids save money with the lowest cost-per-square-foot coverage.
Best Performance
In a side-by-side comparison, Lawson’s formulations exceed solids content found in top-of-the-line popular brands. This gives High Solids the best coverage and finish performance in the aerosol paint industry!
Fewer Cans Needed to Do a Job!
Lawson’s High Solids also give you increased coverage per can, reducing the number of cans needed to do a job. Typical low solids paint brands often require up to four 16 oz. cans to provide coverage that one 20 oz. can of Lawson High Solids paint affords you!
• Wide color selection
• Labor-saving: Often just one coat will do!
• Tough: Passes 150-hour salt-spray test; beats top brands in gloss retention and fade resistance
Industrial Applications – 20 oz. can size; 16 oz. net wt. (1509196 – 20 oz. can size; 15.5 oz. net wt.) Available in package quantities of 1, 3 and 12
• Heat-resistant up to 250°F (121°C); engine paints up to 350°F (177°C); high-temperature up to 1,200°F (649°C)
For use on shop equipment, racks, shelving, assembly lines, motors, safety marking, and more.
NOTE: Actual colors may vary in shade from colors shown here, since they are ink reproductions.
Play it Safe! Wear safety glasses whenever spray painting.
Couldn't load pickup availability
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
Catalog page#: 1-36
Frequently Bought Together
Lawson Blue Industrial Paint
$0.00
Couldn't load pickup availability
High Solids Paints Gray
$0.00
Couldn't load pickup availability
High Solids Engine Paints GM Black
$0.00
Couldn't load pickup availability
Square Turbo Mixer 21 Element with Integrated Nut
$0.00
Couldn't load pickup availability
Chem-Weld 45 Plastic Repair Adhesive 10fl.oz
$0.00
Couldn't load pickup availability
Molding Tape Adhesion Promoter Clear 7.4fl.oz
$0.00
Couldn't load pickup availability
Inner Panel Rustproofer LV 16.5oz
$0.00
Couldn't load pickup availability
Instant Dry Powder Guide Coat
$0.00
Couldn't load pickup availability
Euro-Blackâ„¢ Gloss Finish 15oz
$0.00
Couldn't load pickup availability
Rocker Panel Molding Clip Nylon White 12 x 20mm
$0.00
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
$0.00
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
DTM Primer Gray
$0.00
Couldn't load pickup availability
Engine Degreaser 11oz
$0.00
Couldn't load pickup availability
Diamond-Textured Nitrile Gloves, Orange, 6 Mil, Large, 100/Box
$0.00
Couldn't load pickup availability
DTM Primer Gray
$0.00
Couldn't load pickup availability
Engine Degreaser 11oz
$0.00
Couldn't load pickup availability
Diamond-Textured Nitrile Gloves, Orange, 6 Mil, Large, 100/Box
$0.00
Couldn't load pickup availability
Product Description
Provides the best coverage and finish performance in the aerosol paint industry.Lawson’s High Solids save money with the lowest cost-per-square-foot coverage.
Best Performance
In a side-by-side comparison, Lawson’s formulations exceed solids content found in top-of-the-line popular brands. This gives High Solids the best coverage and finish performance in the aerosol paint industry!
Fewer Cans Needed to Do a Job!
Lawson’s High Solids also give you increased coverage per can, reducing the number of cans needed to do a job. Typical low solids paint brands often require up to four 16 oz. cans to provide coverage that one 20 oz. can of Lawson High Solids paint affords you!
• Wide color selection
• Labor-saving: Often just one coat will do!
• Tough: Passes 150-hour salt-spray test; beats top brands in gloss retention and fade resistance
Industrial Applications – 20 oz. can size; 16 oz. net wt. (1509196 – 20 oz. can size; 15.5 oz. net wt.) Available in package quantities of 1, 3 and 12
• Heat-resistant up to 250°F (121°C); engine paints up to 350°F (177°C); high-temperature up to 1,200°F (649°C)
For use on shop equipment, racks, shelving, assembly lines, motors, safety marking, and more.
NOTE: Actual colors may vary in shade from colors shown here, since they are ink reproductions.
Play it Safe! Wear safety glasses whenever spray painting.
Technical Specifications
| Item#: | 1509160 |
|---|---|
| Type | High Solids Paint |
| Container Type | Aerosol |
| Size | 16 Oz. |
| Basic Color | White |
| Color | Flat White |
| Application Temperature | 50 to 90 °F |
| Dry Time (To Touch) | 10 min |
| Dry Time (Tack Free) | 30 min |
| Base Type | Oil |
| Physical Form | Aerosol |
| Cure / Recoat Time | For best results recoat within 1 hour or after 48 hours. |
| UNSPSC #: | 31211500 |
| TAA Compliant: | Yes |
| Weight: | 1.5 lb |
Product Restrictions
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
