High Solids Paints, Fleet White, 16oz Aerosol
(Pack of
1)
SKU:1509183 Item#: 1509183
Provides the best coverage and finish performance in the aerosol paint industry.
Lawson’s High Solids save money with the lowest cost-per-square-foot coverage.
Best Performance
In a side-by-side comparison, Lawson’s formulations exceed solids content found in top-of-the-line popular brands. This gives High Solids the best coverage and finish performance in the aerosol paint industry!
Fewer Cans Needed to Do a Job!
Lawson’s High Solids also give you increased coverage per can, reducing the number of cans needed to do a job. Typical low solids paint brands often require up to four 16 oz. cans to provide coverage that one 20 oz. can of Lawson High Solids paint affords you!
• Wide color selection
• Labor-saving: Often just one coat will do!
• Tough: Passes 150-hour salt-spray test; beats top brands in gloss retention and fade resistance
Fleet Colors – 20 oz. can size; 16 oz. net wt. Available in package quantities of 1, 3 and 12
• Heat-resistant up to 250°F (121°C); engine paints up to 350°F (177°C); high-temperature up to 1,200°F (649°C)
For trucks, airlines, forklifts and other equipment.
NOTE: Actual colors may vary in shade from colors shown here, since these are ink reproductions.
Play it Safe! Wear safety glasses whenever spray painting.
Couldn't load pickup availability
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
Catalog page#: 1-38
Frequently Bought Together
Industrial Paint Flat Black
$0.00
Couldn't load pickup availability
High Solids Paints Clark Hot Yellow/Green
$0.00
Couldn't load pickup availability
High Solids Paints Clear Acrylic
$0.00
Couldn't load pickup availability
Super Bondâ„¢ Heavy-Duty Activator Heptane Adhesive
$0.00
Couldn't load pickup availability
Flex-E-6020 High Viscosity Seam Sealer
$0.00
Couldn't load pickup availability
Pene-Grease Synthetic Lubricant 11oz
$0.00
Couldn't load pickup availability
High Build Primer Surfacer 12oz
$0.00
Couldn't load pickup availability
Crash Wrap Plastic Film Roll 5mm x 200'
$0.00
Couldn't load pickup availability
DTM Primer Black
$0.00
Couldn't load pickup availability
Front Fender Liner Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Inner Fender Shield Attaching Clip Nylon Black
$0.00
Couldn't load pickup availability
Bumper Drive Rivet Plastic 10mm Hole
$0.00
Couldn't load pickup availability
2K Epoxy Primer Black
$0.00
Couldn't load pickup availability
Engine Degreaser 11oz
$0.00
Couldn't load pickup availability
2K Epoxy Primer Gray
$0.00
Couldn't load pickup availability
2K High Gloss Clear Coat
$0.00
Couldn't load pickup availability
Engine Degreaser 11oz
$0.00
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 2CP
$0.00
Couldn't load pickup availability
Product Description
Provides the best coverage and finish performance in the aerosol paint industry.Lawson’s High Solids save money with the lowest cost-per-square-foot coverage.
Best Performance
In a side-by-side comparison, Lawson’s formulations exceed solids content found in top-of-the-line popular brands. This gives High Solids the best coverage and finish performance in the aerosol paint industry!
Fewer Cans Needed to Do a Job!
Lawson’s High Solids also give you increased coverage per can, reducing the number of cans needed to do a job. Typical low solids paint brands often require up to four 16 oz. cans to provide coverage that one 20 oz. can of Lawson High Solids paint affords you!
• Wide color selection
• Labor-saving: Often just one coat will do!
• Tough: Passes 150-hour salt-spray test; beats top brands in gloss retention and fade resistance
Fleet Colors – 20 oz. can size; 16 oz. net wt. Available in package quantities of 1, 3 and 12
• Heat-resistant up to 250°F (121°C); engine paints up to 350°F (177°C); high-temperature up to 1,200°F (649°C)
For trucks, airlines, forklifts and other equipment.
NOTE: Actual colors may vary in shade from colors shown here, since these are ink reproductions.
Play it Safe! Wear safety glasses whenever spray painting.
Technical Specifications
| Item#: | 1509183 |
|---|---|
| Type | High Solids Paint |
| Container Type | Aerosol |
| Size | 16 Oz. |
| Basic Color | White |
| Color | Fleet White |
| Application Temperature | 50 to 90 °F |
| Dry Time (To Touch) | 10 min |
| Dry Time (Tack Free) | 30 min |
| Physical Form | Aerosol |
| Cure / Recoat Time | For best results recoat within 1 hour or after 48 hours. |
| UNSPSC #: | 31211500 |
| TAA Compliant: | Yes |
| Weight: | 1.32 lb |
Product Restrictions
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
