High Solids Paints Ford New Holland Yellow
(Pack of
1.0)
Provides the bet coverage and finish performance in the aerosol paint industry.
Lawson’s High Solids save money with the lowest cost-per-square-foot coverage.
Best Performance In a side-by-side comparison, Lawson’s formulations exceed solids content found in top-of-the-line popular brands. This gives High Solids the best coverage and finish performance in the aerosol paint industry!
Fewer Cans Needed to Do a Job!
Lawson’s High Solids also give you increased coverage per can, reducing the number of cans needed to do a job. Typical low solids paint brands often require up to four 16 oz. cans to provide coverage that one 20 oz. can of Lawson High Solids paint affords you!
• Wide color selection
• Labor-saving: Often just one coat will do!
• Tough: Passes 150-hour salt-spray test; beats top brands in gloss retention and fade resistance
Agricultural Equipment – 20 oz. can size; 16 oz. net wt. Available in package quantities of 1, 3 and 12
• Heat-resistant up to 250°F (121°C); engine paints up to 350°F (177°C); high-temperature up to 1,200°F (649°C)
For agricultural equipment restoration and maintenance.
NOTE: Actual colors may vary in shade from colors shown here, since these are ink reproductions.
Play it Safe! Wear safety glasses whenever spray painting.
Couldn't load pickup availability
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
Catalog page#: 1-38
Frequently Bought Together
High Solids Paint Sullair Green
Couldn't load pickup availability
High Solids Paint Wacker Yellow
Couldn't load pickup availability
High Solids Paints Metallic Chrome Aluminum
Couldn't load pickup availability
Ure-Foam Expandable Foam Sound Deadener 1.7fl.oz
Couldn't load pickup availability
Speedy 500 Adhesive Remover 15oz
Couldn't load pickup availability
Windshield Wash Tablets
Couldn't load pickup availability
High Solids Paints Light Gray
Couldn't load pickup availability
High Solids Paints OSHA Orange
Couldn't load pickup availability
High Solids Paints BFI Blue
Couldn't load pickup availability
4S Series Crimp-On Elbow 1-1/4 x 2.38"
Couldn't load pickup availability
Torrent, Shutoffvalve HE-3-QS-8
Couldn't load pickup availability
8mm Sliding Tee 6Way T-Handle Met
Couldn't load pickup availability
Fender Splash Shield Retainer Nylon 20mm
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 11.5 x 21
Couldn't load pickup availability
Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Product Description
Provides the bet coverage and finish performance in the aerosol paint industry.Lawson’s High Solids save money with the lowest cost-per-square-foot coverage.
Best Performance In a side-by-side comparison, Lawson’s formulations exceed solids content found in top-of-the-line popular brands. This gives High Solids the best coverage and finish performance in the aerosol paint industry!
Fewer Cans Needed to Do a Job!
Lawson’s High Solids also give you increased coverage per can, reducing the number of cans needed to do a job. Typical low solids paint brands often require up to four 16 oz. cans to provide coverage that one 20 oz. can of Lawson High Solids paint affords you!
• Wide color selection
• Labor-saving: Often just one coat will do!
• Tough: Passes 150-hour salt-spray test; beats top brands in gloss retention and fade resistance
Agricultural Equipment – 20 oz. can size; 16 oz. net wt. Available in package quantities of 1, 3 and 12
• Heat-resistant up to 250°F (121°C); engine paints up to 350°F (177°C); high-temperature up to 1,200°F (649°C)
For agricultural equipment restoration and maintenance.
NOTE: Actual colors may vary in shade from colors shown here, since these are ink reproductions.
Play it Safe! Wear safety glasses whenever spray painting.
Technical Specifications
| Item#: | 1509190 |
|---|---|
| Type | High Solids Paint |
| Container Type | Aerosol |
| Size | 16 Oz. |
| Basic Color | Yellow |
| Color | Ford New Holland Yellow |
| Application Temperature | 50 to 90 °F |
| Dry Time (To Touch) | 10 min |
| Dry Time (Tack Free) | 30 min |
| Physical Form | Aerosol |
| Cure/Recoat Time | For best results recoat within 1 hour or after 48 hours. |
| UNSPSC #: | 31211500 |
| TAA Compliant: | Yes |
| Weight: | 1.25 lb |
Product Restrictions
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
