Instant Gasket Maker, Black, 10 oz Power Can, Paste Form
(Pack of
1)
SKU:27819 Item#: 27819
Return equipment to service and enhance productivity by making your own leakproof gaskets in just one minute. This innovative rubber gasket technology is blow-out resistant and outperforms pre-cut gaskets. It seals instantly, sets quickly, and is tack-free in five minutes.
Can has easy dispensing lever and makes an average of 14 to 18 gaskets
Resistant to oil, coolant, automatic transmission fluids and gear oil
Operates in environments to 600°F (315°C) continuous, 650°F (343°C) intermittent
Meets or exceeds requirements for oxygen sensor equipped engines
1. Make sure surface is clean and dry. Snap off tamper-proof tab and remove overcap.
2. To open valve, turn nozzle counterclockwise 1/4 turn and raise lever. To dispense, press the lever. To close, turn nozzle clockwise. Replace overcap.
3. If sealant has dried in the nozzle, make sure nozzle is closed and swing the lever over the nozzle. Pull nozzle forward to remove and clean the tip with a paper clip or compressed air line.
4. Replace nozzle back over valve with the thicker of the two tabs at the base of the nozzle facing the lever hinge. Push the nozzle backwards towards the hinge. Swing the lever back over the nozzle, push down on the lever to firmly click the nozzle back into position.
Couldn't load pickup availability
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
Catalog page#: 1-97
Frequently Bought Together
Flexseal Dispense-A-Gasket RTV Silicone Grey 9oz
$0.00
Couldn't load pickup availability
7471™ Primer T™ Amber 51ml
$0.00
Couldn't load pickup availability
Weatherstrip Adhesive Black 5oz
$0.00
Couldn't load pickup availability
Chem-Weld 45 Plastic Repair Adhesive 10fl.oz
$0.00
Couldn't load pickup availability
Molding Tape Adhesion Promoter Clear 7.4fl.oz
$0.00
Couldn't load pickup availability
Quick Seal MSP Seam Sealer White 6.76fl.oz
$0.00
Couldn't load pickup availability
Abrasive Bristle Wire Belt Housing Aluminum 23mm
$0.00
Couldn't load pickup availability
Abrasive Bristle Wire Belt Steel 23mm
$0.00
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 3/16"
$0.00
Couldn't load pickup availability
Stop-Gap Flexible Sealant Clear 10oz
$0.00
Couldn't load pickup availability
Sealicone™ RTV Silicone Sealant Clear 8oz
$0.00
Couldn't load pickup availability
Flexseal All Purpose Silicone Rubber Sealant
$0.00
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
$0.00
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Product Description
Return equipment to service and enhance productivity by making your own leakproof gaskets in just one minute. This innovative rubber gasket technology is blow-out resistant and outperforms pre-cut gaskets. It seals instantly, sets quickly, and is tack-free in five minutes. Can has easy dispensing lever and makes an average of 14 to 18 gaskets
Resistant to oil, coolant, automatic transmission fluids and gear oil
Operates in environments to 600°F (315°C) continuous, 650°F (343°C) intermittent
Meets or exceeds requirements for oxygen sensor equipped engines
1. Make sure surface is clean and dry. Snap off tamper-proof tab and remove overcap.
2. To open valve, turn nozzle counterclockwise 1/4 turn and raise lever. To dispense, press the lever. To close, turn nozzle clockwise. Replace overcap.
3. If sealant has dried in the nozzle, make sure nozzle is closed and swing the lever over the nozzle. Pull nozzle forward to remove and clean the tip with a paper clip or compressed air line.
4. Replace nozzle back over valve with the thicker of the two tabs at the base of the nozzle facing the lever hinge. Push the nozzle backwards towards the hinge. Swing the lever back over the nozzle, push down on the lever to firmly click the nozzle back into position.
Technical Specifications
| Item#: | 27819 |
|---|---|
| Type | Sealant and Caulk |
| Container Type | Power Can |
| Color | Black |
| Size | 10 Oz. |
| Temperature Range | -58 to 392 °F |
| Physical Form | Paste |
| UNSPSC #: | 31201600 |
| TAA Compliant: | Yes |
| Weight: | 0.79 lb |
Product Restrictions
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
