Interlocking Clamp, Malleable Steel, 3/4" ID, 1-1/2 to 1-11/16" OD
(Pack of
1)
SKU:41321 Item#: 41321
• High-pressure systems
Note: Bolts used on interlocking clamps are not standard bolts. They vary from standard bolts in length, diameter, thread length and hardness. Bolts must be torqued to specific tension and should not be reused.
• For use with air, water, steam, high pressure spray and LPG
Note: Bolts used on interlocking clamps are not standard bolts. They vary from standard bolts in length, diameter, thread length and hardness. Bolts must be torqued to specific tension and should not be reused.
NOTE: Pressurized steam is an extremely dangerous commodity. Only hoses, fittings, clamps, and accessory items that have been approved for steam service should be used.
Frequently Bought Together
Air Hose End Barb Reusable Brass 3/8 x 3/8-18
$0.00
Couldn't load pickup availability
Hose Barb Hose Mender Brass 5/16 x 5/16"
$0.00
Couldn't load pickup availability
Hose End Brass 1/4" x 1/4-18
$0.00
Couldn't load pickup availability
Quick Disconnect Plug Brass 1/4" x 1/4-18
$0.00
Couldn't load pickup availability
Quick Disconnect Plug Steel 1/4" x 1/4-18
$0.00
Couldn't load pickup availability
Quick Disconnect Plug Steel 1/4" x 1/4-18
$0.00
Couldn't load pickup availability
Miniature Clamp SS 3/16 to 5/8"
$0.00
Couldn't load pickup availability
Slotted Hex Head Hose Clamp 301 SS 3/8 to 7/8"
$0.00
Couldn't load pickup availability
Hose Clamp 304 SS 9/16 to 1-1/16"
$0.00
Couldn't load pickup availability
Quick Disconnect Plug Steel 1/4" x 1/4-18
$0.00
Couldn't load pickup availability
All-Plastic Ergonomic Reduced Noise Blow Gun
$0.00
Couldn't load pickup availability
Ergonomic Blow Gun Rubber Tip
$0.00
Couldn't load pickup availability
Rocker Panel Molding Clip Nylon White 12 x 20mm
$0.00
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
$0.00
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Product Description
• High-pressure systemsNote: Bolts used on interlocking clamps are not standard bolts. They vary from standard bolts in length, diameter, thread length and hardness. Bolts must be torqued to specific tension and should not be reused.
• For use with air, water, steam, high pressure spray and LPG
Note: Bolts used on interlocking clamps are not standard bolts. They vary from standard bolts in length, diameter, thread length and hardness. Bolts must be torqued to specific tension and should not be reused.
NOTE: Pressurized steam is an extremely dangerous commodity. Only hoses, fittings, clamps, and accessory items that have been approved for steam service should be used.
Technical Specifications
| Item#: | 41321 |
|---|---|
| Manufacturer Model #: | B10 |
| Style | 2-Bolt |
| Type | Interlocking Clamp |
| Material | Steel |
| Hose I.D. | 3/4 " |
| Torque (Dry) | 21 ft·lbf |
| UNSPSC #: | 27131600 |
| TAA Compliant: | No |
| Weight: | 1.09 lb |
Product Restrictions
