Mega-Crete Fast Cure 10 lbs. Kit with Eco-aggregate
(Pack of
1.0)
A rapid setting, high strength low viscosity concrete repair material to fix spalled concrete, cracked concrete, and for filling pin holes and small surface defects on concrete floors. This 2-part 1:1 mix system is 100% solids can be used to rebuild or repair broken control joints, voids under concrete or tile, and can be injected into cracks.
• 4X stronger than concrete
• 6X abrasion resistant than concrete
• Permanent bond to concrete, metal/rebar, and wood
• Resists corrosion, chemicals, and wear
• Self-leveling
• Self-Priming
• Drive over in less than 1 hour at 75°F/ 24°C
• Repairs can be made in cold temperatures (as low as -20°F/ -29°C)
• Excellent trowel ability and feathers to a smooth edge
• Fill pin holes and small surface defects
• Rebuild control joints
• High traffic areas
• Spalls and cracks
Coverage Rate
1/8" x 1" crack - 154 linear ft. per gal
1/4" x 1" crack - 77 linear ft. per gal
1/2" x 1" crack - 39 linear ft per gal
300 to 500 sq. ft. per gal
Frequently Bought Together
Flex-E-6020 High Viscosity Seam Sealer
Couldn't load pickup availability
Silicone Lubricant 10oz
Couldn't load pickup availability
Quick Seal MSP Seam Sealer Beige 6.76fl.oz
Couldn't load pickup availability
Mega-Crete Slurry II 10 lbs. Kit
Couldn't load pickup availability
Mega Patch H2O 4MM
Couldn't load pickup availability
Mega-Crete Fast Cure 50 lbs. Kit with Aggregate
Couldn't load pickup availability
Mega Dye Pack Gray
Couldn't load pickup availability
Mega-Crete Fast Cure Concrete Repair, Liquids Only
Couldn't load pickup availability
Eco Green Mega Aggregate
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-13/16(M8)
Couldn't load pickup availability
Product Description
A rapid setting, high strength low viscosity concrete repair material to fix spalled concrete, cracked concrete, and for filling pin holes and small surface defects on concrete floors. This 2-part 1:1 mix system is 100% solids can be used to rebuild or repair broken control joints, voids under concrete or tile, and can be injected into cracks.• 4X stronger than concrete
• 6X abrasion resistant than concrete
• Permanent bond to concrete, metal/rebar, and wood
• Resists corrosion, chemicals, and wear
• Self-leveling
• Self-Priming
• Drive over in less than 1 hour at 75°F/ 24°C
• Repairs can be made in cold temperatures (as low as -20°F/ -29°C)
• Excellent trowel ability and feathers to a smooth edge
• Fill pin holes and small surface defects
• Rebuild control joints
• High traffic areas
• Spalls and cracks
Coverage Rate
1/8" x 1" crack - 154 linear ft. per gal
1/4" x 1" crack - 77 linear ft. per gal
1/2" x 1" crack - 39 linear ft per gal
300 to 500 sq. ft. per gal
Technical Specifications
| Item#: | 1635578 |
|---|---|
| Type | Liquid Binder and Aggregate |
| Suitable Substrates | Concrete, Masonry, Metal, Wood |
| Color | Black liquid mixed, gray when cured |
| Container Type | Kit |
| Size | 10 lb |
| Cure Time (Foot Traffic) | 25-30 minutes @ 75°F (24°C) |
| Cure Time (Traffic Ready) | 45-60 minutes @ 75°F (24°C) |
| Compression Strength | 6,240 PSI (5,940 PSI with aggregate) |
| Working Time | 8-10 minutes @ 75°F (24°C) |
| Shore "D" Hardness | 67 to 72D |
| Tensile Strength | 5,800 PSI |
| Viscosity | 180 cps |
| Elongation | 4 % |
| Pot Life | 5 minutes @100g mass |
| UNSPSC #: | 31201600 |
| TAA Compliant: | Yes |
