Miniature LED Bulb, 5Watt, Resistor Warning Canceller
(Pack of
2)
SKU:1607725 Item#: 1607725
Vehicles are required to have Outage Detection systems that warn drivers when a bulb has burned out. These systems work by monitoring the power consumed by the bulb. When the power drops below a preset threshold, the warning is triggered. The warning can be either a hyperflash (fast-blinking of the turn signal) and/or a warning light on the dashboard.
LED bulbs consume a fraction of the power of incandescent bulbs. This difference can be enough to trigger your car’s outage warning system. In many cases, LED bulbs use so little power they end up triggering an outage warning.
The warning canceller must be connected between the turn and ground wires of the socket. Because its power consumption will be dissipated as heat, it is important to attach it to a flat metal surface so the heat can be safely dissipated.
The required warning canceller is determined by the wattage of the incandescent bulb being replaced. For bulbs inbetween choose whichever is closest.
Frequently Bought Together
Miniature Incandescent Bulb 12V
$0.00
Couldn't load pickup availability
Miniature Incandescent Bulb 12V
$0.00
Couldn't load pickup availability
H16 T3 1/2 12V 19W PGJ19-3 Halogen Lamp
$0.00
Couldn't load pickup availability
Butt Connector 22 to 24 AWG Clear
$0.00
Couldn't load pickup availability
Master Series Handheld Flashlight
$0.00
Couldn't load pickup availability
Ring Tongue Terminal 12 to 10 AWG Yellow
$0.00
Couldn't load pickup availability
Miniature Incandescent Bulb 12V
$0.00
Couldn't load pickup availability
Halogen Miniature Bulb 45/65W 12V
$0.00
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 1.5CP
$0.00
Couldn't load pickup availability
4Pc Adjustable/Pipe Wrench Set
$0.00
Couldn't load pickup availability
Quick Seal 2000 Sprayable Seam Sealer Beige
$0.00
Couldn't load pickup availability
Ceramic Detail Spray - RTU
$0.00
Couldn't load pickup availability
Phillips Truss Head Sheet Metal Screw Steel 15mm
$0.00
Couldn't load pickup availability
Front Bumper Specialty Nut Steel M4.2-1.41
$0.00
Couldn't load pickup availability
Fender Lining Screw Grommet Nylon #12
$0.00
Couldn't load pickup availability
Product Description
Vehicles are required to have Outage Detection systems that warn drivers when a bulb has burned out. These systems work by monitoring the power consumed by the bulb. When the power drops below a preset threshold, the warning is triggered. The warning can be either a hyperflash (fast-blinking of the turn signal) and/or a warning light on the dashboard.LED bulbs consume a fraction of the power of incandescent bulbs. This difference can be enough to trigger your car’s outage warning system. In many cases, LED bulbs use so little power they end up triggering an outage warning.
The warning canceller must be connected between the turn and ground wires of the socket. Because its power consumption will be dissipated as heat, it is important to attach it to a flat metal surface so the heat can be safely dissipated.
The required warning canceller is determined by the wattage of the incandescent bulb being replaced. For bulbs inbetween choose whichever is closest.
Technical Specifications
| Item#: | 1607725 |
|---|---|
| Type | Miniature |
| Light Source | LED |
| Watts | 5 |
| Description | 5w Warning Canceller |
| UNSPSC #: | 25172901 |
| TAA Compliant: | Yes |
| Weight: | 0.07 lb |
