One-Piece Anchor, Nylon, 3/16 to 1/2" Grip Range, 1/4 x 1"
(Pack of
25)
SKU:95004 Item#: 95004
• Manufactured of tough DuPont™ nylon
• Low thermal conductivity
• Vibration-resistant
• Non-corrosive
• Tamper-resistant
• USDA approved
• Can be used in plywood, studs, furring strips, concrete block, brick, plastic, Plexiglas®, sanitary wall systems, metal and foam insulation
• For brick, block and concrete, use Masonry Drill Bit No. 95050; for other applications, use Lawson K Drill Bit No. 86486
1. Drill 9/32" (0.281") dia. hole.
2. Drive anchor flush.
Frequently Bought Together
Masonry Anchor Assortment 700Pcs
$0.00
Couldn't load pickup availability
Masonry Anchor Assortment 700Pcs
$0.00
Couldn't load pickup availability
Toggle Bolt Anchor Assortment 70Pcs
$0.00
Couldn't load pickup availability
DIN 125A Flat Washer Grade 140 HV M6
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 30mm
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 16mm
$0.00
Couldn't load pickup availability
Engine Under Cover Drive Rivet Plastic 7mm Hole
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Drive Rivet Nylon M8
$0.00
Couldn't load pickup availability
Wing Type Toggle Bolt Steel #6-32 x 2"
$0.00
Couldn't load pickup availability
Toggle Bolt Anchor Wing #10-24
$0.00
Couldn't load pickup availability
ALLIGATOR® Anchor Nylon #4 to #10
$0.00
Couldn't load pickup availability
Product Description
• Manufactured of tough DuPont™ nylon• Low thermal conductivity
• Vibration-resistant
• Non-corrosive
• Tamper-resistant
• USDA approved
• Can be used in plywood, studs, furring strips, concrete block, brick, plastic, Plexiglas®, sanitary wall systems, metal and foam insulation
• For brick, block and concrete, use Masonry Drill Bit No. 95050; for other applications, use Lawson K Drill Bit No. 86486
1. Drill 9/32" (0.281") dia. hole.
2. Drive anchor flush.
Technical Specifications
| Item#: | 95004 |
|---|---|
| Length | 1 " |
| Type | Nylon One Piece Anchor |
| Size | 1/4 x 1 " |
| Diameter | 1/4 " |
| Material | Nylon |
| Head Diameter | 5/8 " |
| Drill Size | .281 (K) " |
| Grip Range | 3/16 - 1/2 " |
| Anchor Size | 1/4 x 1 " |
| Shear Strength Hollow Material | 250 lb |
| Pull-Out Strength Hollow Wall | 130 lb |
| Pull-Out Strength Cement Block | 150 lb |
| UNSPSC #: | 31162103 |
| TAA Compliant: | Yes |
| Weight: | 0.09 lb |
