Pilotdrive Cryotap 1/4"-28 Starter Hand Tap
(Pack of 1.0)

CryoTool®

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Check Availability

Quantity

Frequently Bought Together

Spot Weld Remover Drill Bit Kit 11Pcs

Spot Weld Remover Drill Bit 5/16" (M8)

Cryoslash 3-5/8" x 1/2" x 0.025" Air Saw Blade 32 TPI

Item#: DY80324232

Adhesive-Back Shim Stock 5/32 x 3/8" x 30'

Cut-Off Wheel Dispenser For 4-1/2" Diameter Wheels-Kent

Quick Seal 2000 Sprayable Seam Sealer Gray

Push-Type Retainer Nylon 16 x 19mm

Front Bumper Specialty Nut Steel M4.2-1.41

Radiator Grille Nut M4.2-1.41

HSS Spiral Point Hand Tap 12-24

HSS Spiral Point Hand Tap 1/2-20

HSS Spiral Point Hand Tap 5/16-24

HSS Combination Drill-Tap M12

HSS Left Hand Plug Tap 3/8-24

HSS Combination Drill-Tap M10

Zirconium Grain Locking Grinding Disc 2"

Polymer Wheel Rubber Eraser 30mm

Spot Weld Remover Drill Bit HSS 2-3/4" (M8)

Product Description

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#:	DY80635010
Type	Fractional
Diameter	1/4 "
Pitch	28
Flutes	4
Thread Length	5/8 "
H Limits	H3
Overall Length	2-1/2 "
Recommended Drill Size	No. 3
UNSPSC #:	23241615
TAA Compliant:	No
Weight:	0.03 lb

Product Restrictions

Suggested Products

Spot Weld Remover Drill Bit HSS 2-13/16(M8)

Sheet Metal Drill Bit Alloy Steel 1/8"

Spot Weld Remover Drill Bit HSS 1/4" (M6)

Abrasive Hand Pad All Purpose 6 x 9"

Spot Weld Remover Drill Bit HSS 3/8" (M10)

Twist-On Abrasive Disc 2"

Sheet Metal Drill Bit Alloy Steel 1/4"

Scotch-Brite Roloc Bristle Disc 2"

Aluminum Oxide Grain Locking Grinding Disc 2"

Sheet Metal Drill Bit Alloy Steel 3/16"

Scotch-Brite Roloc Bristle Disc 2"

Zirconium Grain Locking Grinding Disc 2"

Your Recently Viewed Items