Pilotdrive Cryotap M10 x 1.5 Metric Tri-Pak, Taper, Plug, Bottoming
(Pack of
1)
SKU:DY80691016 Item#: DY80691016
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Treatment: Cryophase™ thermal cycle process
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
M2 Sheet Metal Hole Cutter 3/8"
Couldn't load pickup availability
Curved Wood Handle Scratch Brush
Couldn't load pickup availability
Cryobit 3/16" Dia. Maintenance Drill Bit , 135o Split Point, W/ Flats
Couldn't load pickup availability
Cryotap M10 x 1.5 Metric Bottoming Hand Tap
Couldn't load pickup availability
Cryotap #4-40 Plug Hand Tap
Couldn't load pickup availability
Cryotap 3/4"-16 Plug Hand Tap
Couldn't load pickup availability
Nylon Cable Tie 11-3/4" Black
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 7mm Hole
Couldn't load pickup availability
Rivet Nylon 1/4"
Couldn't load pickup availability
4-Flute HSS Hand Tap Kit M16 x 2
Couldn't load pickup availability
Cryotap 1/2"-13 Tri-Pak
Couldn't load pickup availability
Cryotap M10 x 1.5 Metric Taper Hand Tap
Couldn't load pickup availability
8Pc Metric Flare Nut Wrench Set
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-3/4" (M8)
Couldn't load pickup availability
9" Hi-Level Heavy-Duty Power Jaw Plier-Cutter
Couldn't load pickup availability
Product Description
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Treatment: Cryophase™ thermal cycle process
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80691016 |
|---|---|
| Type | Metric |
| Style | Set |
| Material | CM-8™ Tool Steel |
| Diameter | M10 |
| Pitch | 1.5 mm |
| Flutes | 4 |
| Thread Length | 2-15/16 " |
| H Limits | 4 |
| Recommended Drill Size | 8.5 mm |
| Description | One each of Pilotdrive, Plug, and Bottoming Style Taps |
| UNSPSC #: | 23241615 |
| TAA Compliant: | No |
| Weight: | 0.31 lb |
