Pilotdrive Cryotap M18 x 1.5 Starter Hand Tap
(Pack of
1)
SKU:DY80636027 Item#: DY80636027
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Double Flute Step Drill Bit 1/8 to 1/2"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-1/4" (M6)
$0.00
Couldn't load pickup availability
1/4" - 3/4" Cryonitride Spiral Fluted Step Drill - 3/8" Shank
$0.00
Couldn't load pickup availability
Spinning Handmaster Driver Set 5Pc Set
$0.00
Couldn't load pickup availability
1/4" - 3/4" Cryonitride Spiral Fluted Step Drill - 3/8" Shank
$0.00
Couldn't load pickup availability
Mini-Hole Saw Kit
$0.00
Couldn't load pickup availability
Bumper Fascia General Purpose Split Rivet 3/16"
$0.00
Couldn't load pickup availability
Fender Splash Shield Push Rivet Nylon 7mm Hole
$0.00
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap 7/16-14
$0.00
Couldn't load pickup availability
Pilotdrive Cryotap M7 x 1.0 Starter Hand Tap
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap M16 x 2
$0.00
Couldn't load pickup availability
HSS Left Hand Plug Tap 5/16-18
$0.00
Couldn't load pickup availability
4-Flute HSS Plug Hand Tap M14 x 1.5
$0.00
Couldn't load pickup availability
Cryo-Drap #10-24 Drill & Tap Combo, 135o Split Point, W/Flats
$0.00
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/4"
$0.00
Couldn't load pickup availability
Interchangeable Hex Bit Set 20Pc Torx
$0.00
Couldn't load pickup availability
12" Auto-Adjust Pliers
$0.00
Couldn't load pickup availability
Product Description
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80636027 |
|---|---|
| Type | Metric |
| Diameter | M18 |
| Pitch | 1.5 mm |
| Flutes | 4 |
| Overall Length | 4-1/32 " |
| Recommended Drill Size | 21/32 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | No |
| Weight: | 0.24 lb |
Product Restrictions
