Screwdriver, Insulated, Slotted, 1/4 x 5-7/8"
(Pack of
1.0)
Same great features as non-insulated MAXXPRO® PLUS Screwdrivers except the handle doesn’t have microfiber panels
The thumb placement zone helps keep thumb from slipping
Warning: Insulated tools are not intended for use on live or energized circuits. Always disconnect and de-energize all equipment and circuits. Never work on live or energized circuits or equipment. Visually inspect 1,000-Volt tools regularly before use. If insulation appears to be penetrated, loose, damaged or worn, discard and replace the tool.
Frequently Bought Together

Razor Blade Single Edge w/Notch
Couldn't load pickup availability

Nutsetter & Bit Set, Magnetic, 22pc
Couldn't load pickup availability

8Pc Metric Flare Nut Wrench Set
Couldn't load pickup availability

Screwdriver, Insulated, Phillips, #3 x 5-7/8"
Couldn't load pickup availability

Screwdriver, Insulated, Slotted, 3/32 x 2-15/16"
Couldn't load pickup availability

1000V Insulated Screwdriver Slotted 6.5"
Couldn't load pickup availability

Insert Bit, Driver Bit Hex 1/4 x 25mm, H 1/8
Couldn't load pickup availability

Insert Bit, Driver Bit Slotted 1/4 x 25mm, Slot 4.5
Couldn't load pickup availability

Insert Bit, Driver Bit Torx 1/4 x 25mm, Tx T40
Couldn't load pickup availability

Front Fender Push-Type Retainer Nylon 20mm
Couldn't load pickup availability

Specialty Rivet with Plastic Cap Aluminum 3.2mm
Couldn't load pickup availability

Fender Apron Drive Rivet 8mm Hole
Couldn't load pickup availability

Spot Weld Remover Drill Bit HSS 3/8" (M10)
Couldn't load pickup availability

Interchangeable Hex Bit Set 24Pc SAE
Couldn't load pickup availability

Master Security Bit Set 203Pc
Couldn't load pickup availability
Product Description
Same great features as non-insulated MAXXPRO® PLUS Screwdrivers except the handle doesn’t have microfiber panels The thumb placement zone helps keep thumb from slipping
Warning: Insulated tools are not intended for use on live or energized circuits. Always disconnect and de-energize all equipment and circuits. Never work on live or energized circuits or equipment. Visually inspect 1,000-Volt tools regularly before use. If insulation appears to be penetrated, loose, damaged or worn, discard and replace the tool.
Technical Specifications
Item#: | 42381 |
---|---|
Style | Screwdriver |
Drive Style | Slotted |
Size | 1/4 x 10-1/4 " |
Overall Length | 10-1/2 " |
Blade Width | 1/4 " |
Blade Thickness | 1/4 " |
Blade Length | 5-7/8 " |
Fits Screw Diameter | Nos. 6, 7, 8 |
Handle Diameter | 1-3/16 " |
UNSPSC #: | 27111736 |
TAA Compliant: | Yes |
Weight: | 0.29 lb |
Product Restrictions
