Sili-Gasket - E-Z Lever Black RTV Silicone Sealant
(Pack of
1.0)
RTV silicone gasket sealant compound specially formulated to bond rubber, metal, cork and glass components.
Performance Characteristics
• E-Z Trigger Lever provides maximum control
• Skins over quickly
• Remains flexible – will not harden, shrink or crack• Resists gasoline and most automotive solvents• 8 oz. net weight
• Temperature Range:_x000D_ –65°F to +450°F (–54°C to +232°C)_x000D_
ApplicationsUniversal replacement of conventional gaskets. Use on timing chain covers, oil/transmission pans, heater-blower mounts, and thermostat and transmission housings.
1. Make sure surface is clean and dry. Snap off tamper-proof tab and remove overcap.2. To open, turn nozzle counterclockwise for 1/4 turn to open valve and raise lever. To dispense, press the lever. To close, turn nozzle clockwise. Replace overcap.3. If sealant has dried in the nozzle, make sure nozzle is closed and swing the lever over the nozzle. Pull nozzle forward to remove and clean the tip with a paper clip or compressed air line.4. Replace nozzle back over valve with the thicker of the two tabs at the base of the nozzle facing the lever hinge. Push the nozzle backwards towards the hinge. Swing the lever back over the nozzle, push down on the lever to firmly “click” the nozzle back into position.
Couldn't load pickup availability
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
Frequently Bought Together
Product Description
RTV silicone gasket sealant compound specially formulated to bond rubber, metal, cork and glass components.Performance Characteristics
• E-Z Trigger Lever provides maximum control
• Skins over quickly
• Remains flexible – will not harden, shrink or crack• Resists gasoline and most automotive solvents• 8 oz. net weight
• Temperature Range:_x000D_ –65°F to +450°F (–54°C to +232°C)_x000D_
ApplicationsUniversal replacement of conventional gaskets. Use on timing chain covers, oil/transmission pans, heater-blower mounts, and thermostat and transmission housings.
1. Make sure surface is clean and dry. Snap off tamper-proof tab and remove overcap.2. To open, turn nozzle counterclockwise for 1/4 turn to open valve and raise lever. To dispense, press the lever. To close, turn nozzle clockwise. Replace overcap.3. If sealant has dried in the nozzle, make sure nozzle is closed and swing the lever over the nozzle. Pull nozzle forward to remove and clean the tip with a paper clip or compressed air line.4. Replace nozzle back over valve with the thicker of the two tabs at the base of the nozzle facing the lever hinge. Push the nozzle backwards towards the hinge. Swing the lever back over the nozzle, push down on the lever to firmly “click” the nozzle back into position.
Technical Specifications
| Item#: | KT13117 |
|---|---|
| Type | RTV Silicone |
| Container Type | Aerosol |
| Color | Black |
| Size | 8 Oz. |
| Physical Form | Level 1 Aerosol |
| UNSPSC #: | 31201600 |
| TAA Compliant: | Yes |
| Weight: | 0.9 lb |
Product Restrictions
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
