Solderless Glass Fuse In-Line Fuse Holder, 32 Volts, 30 Amps, Suitable for 1/4" Diameter Fuses
(Pack of
10)
SKU:94877 Item#: 94877
• Accepts three sizes of 1/4" dia. fuses: 1/4" x 7/8", 1/4" x 1" and 1/4" x 1-1/4"
• Rated 30A, 32V
Installation1. Strip insulation from wire (approximately 3/8").2. Insert wire in holder.3. Crimp terminal through body.4. Repeat steps 1 – 3 for other half of holder.5. Insert fuse.6. Snap housing together.
Frequently Bought Together
Nylon Cable Tie 11-3/4" Black
Couldn't load pickup availability
Nylon Cable Tie 7-1/2" Black
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 3CP
Couldn't load pickup availability
In-Line Fuse Holder Low-Profile JCASE 12 AWG 40A
Couldn't load pickup availability
MINI In-Line Fuse Holder with Cap 32V 20A
Couldn't load pickup availability
JCASE In-Line Fuse Holder Low-Profile 32V 40A
Couldn't load pickup availability
Low-Profile MINI Fuse 10A Red
Couldn't load pickup availability
MINI Fuse 10A Red
Couldn't load pickup availability
Low-Profile MINI Fuse 30A Green
Couldn't load pickup availability
Fender Apron Drive Rivet 8mm Hole
Couldn't load pickup availability
Engine Under Cover Drive Rivet Plastic 7mm Hole
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Product Description
• Accepts three sizes of 1/4" dia. fuses: 1/4" x 7/8", 1/4" x 1" and 1/4" x 1-1/4"• Rated 30A, 32V
Installation1. Strip insulation from wire (approximately 3/8").2. Insert wire in holder.3. Crimp terminal through body.4. Repeat steps 1 – 3 for other half of holder.5. Insert fuse.6. Snap housing together.
Technical Specifications
| Item#: | 94877 |
|---|---|
| Type | Solderless |
| UNSPSC #: | 39121624 |
| TAA Compliant: | Yes |
| Weight: | 0.17 lb |
