Solid Drill Bit, Carbide, Titanium Carbonitride Finish, 135° Point, 1/2" Flute Length, 1/8 x 1-7/8"
(Pack of
1)
SKU:P58026 Item#: P58026
• Modified relief angles on a 135° point penetrate the workpiece easier while maintaining a durable outside cutting edge
• Titanium CarboNitride (TiCN) coating improves heat resistance and reduces wear to the cutting edges; outperforms Titanium Nitride (TiN) coatings
• Three-flute design removes chips effectively
• No cutting fluids are needed for Cobra™ Drill Bits
• For use on heat-treated, hardened material up to Rc 65
• Recommended for drill press operation only
NOTE: Cobra™ Drill Bits should be run at higher speeds than standard high-speed steel twist drills. It is also recommended that a woodpeckering technique be used to prevent chips from clogging in the flutes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Drill Bit Carbide #29
$0.00
Couldn't load pickup availability
Cryo Armor Cut 10.5MM Dia. Metric Drill Bit, Carbide 118o Point
$0.00
Couldn't load pickup availability
Drill Bit Carbide 17/64"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
Twist-On Abrasive Disc 2"
$0.00
Couldn't load pickup availability
Stemmed Knot-Type Wire Wheel 3"
$0.00
Couldn't load pickup availability
Cryobit 3/16" Dia. Maintenance Drill Bit , 135o Split Point, W/ Flats
$0.00
Couldn't load pickup availability
Cryobit 1/4" Dia. Maintenance Drill Bit , 135o Split Point, W/ Flats
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Bundle 11Pcs
$0.00
Couldn't load pickup availability
Air Distributor Defroster Push-Type Retainer
$0.00
Couldn't load pickup availability
Fender Liner Screw Grommet Nylon M5.5
$0.00
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 10 x 12mm
$0.00
Couldn't load pickup availability
2Pc Index-Tend Pry Bar Set
$0.00
Couldn't load pickup availability
Alu-Master 8-Way Torpedo Level
$0.00
Couldn't load pickup availability
18" Locking Smooth Operator Clamp
$0.00
Couldn't load pickup availability
Product Description
• Modified relief angles on a 135° point penetrate the workpiece easier while maintaining a durable outside cutting edge• Titanium CarboNitride (TiCN) coating improves heat resistance and reduces wear to the cutting edges; outperforms Titanium Nitride (TiN) coatings
• Three-flute design removes chips effectively
• No cutting fluids are needed for Cobra™ Drill Bits
• For use on heat-treated, hardened material up to Rc 65
• Recommended for drill press operation only
NOTE: Cobra™ Drill Bits should be run at higher speeds than standard high-speed steel twist drills. It is also recommended that a woodpeckering technique be used to prevent chips from clogging in the flutes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | P58026 |
|---|---|
| Drill Type | Fractional |
| Type | Drill Bit |
| Material | Carbide |
| Finish | Titanium CarboNitride |
| Diameter | 1/8 " |
| Decimal Equivalent | 0.1250 " |
| Point | 135 ° |
| Flutes | 3 |
| Flute Length | 1/2 " |
| Overall Length | 1-7/8 " |
| SAE Code | TD0CSX 0.1250 SB056 / 00.50 - 01.88 |
| UNSPSC #: | 23241605 |
| TAA Compliant: | Yes |
| Weight: | 0.015 lb |
Product Restrictions
