Spot Weld Remover Drill Bit HSS 3" (M10)
(Pack of
1)
M100 for average domestic spot welds (10mm).
Drill point is self-centering, so pre-marking is not required
Three flats on shank prevent drill from spinning in drill chuck
Straight cutting lips strengthen the outer cutting edges of the drill point
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together

Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
Couldn't load pickup availability

Scotch-Brite Roloc Bristle Disc 2"
Couldn't load pickup availability

Scotch-Brite Roloc Bristle Disc 2"
Couldn't load pickup availability

Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability

Sheet Metal Drill Bit Alloy Steel 5/32"
Couldn't load pickup availability

Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability

Fender Apron Drive Rivet 8mm Hole
Couldn't load pickup availability

High-Tech Seam Sealer Clear 5fl.oz
Couldn't load pickup availability

Specialty Rivet with Plastic Cap Aluminum 3.2mm
Couldn't load pickup availability

Spot Weld Remover Drill Bit Cobalt 3/8" (M10)
Couldn't load pickup availability

Spot Weld Remover Drill Bit
Couldn't load pickup availability

Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability

Alu-Master 8-Way Torpedo Level
Couldn't load pickup availability

Interchangeable Hex Bit Set 24Pc SAE
Couldn't load pickup availability

Abrasive Hand Pad All Purpose 6 x 9"
Couldn't load pickup availability
Product Description
M100 for average domestic spot welds (10mm). Drill point is self-centering, so pre-marking is not required
Three flats on shank prevent drill from spinning in drill chuck
Straight cutting lips strengthen the outer cutting edges of the drill point
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
Item#: | 54456 |
---|---|
Type | Spot Weld Drill Bit |
Style | Single-Ended |
Material | HSS |
Diameter | 3/8 " |
Decimal Equivalent | 0.3750 " |
Flute Type | Spiral |
Overall Length | 3 " |
Shank | Straight |
UNSPSC #: | 23241606 |
TAA Compliant: | Yes |
Weight: | 0.09 lb |
Product Restrictions

