Steel Crimped End Brush 1/2"
(Pack of
1)
• Outlast standard brushes by at least 2-to-1
• High tensile, heat-treated wire for excellent fatigue resistance and fast cutting capabilities
• Provide continuous cutting action, uniform surface contaminant removal and a smooth finish
• Quality is continuously checked during the manufacturing process; brush samples must remain 100% intact when tested at 120% of their rated operating speed
• Unique manufacturing process neatly arranges wire so each tuft contains the same count
• For spot facing, rubber or plastic flash removal, scale or slag removal, rust or paint removal, die, mold and tool polishing, cleaning or finishing recessed areas, weld cleaning, and carbon cleaning
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Frequently Bought Together
Single Row Knot-Type Cup Brush 2-3/4"
Couldn't load pickup availability
Standard Crimped Wire Wheel 4"
Couldn't load pickup availability
Steel Bore Tube Brush 11/32"
Couldn't load pickup availability
Mounted Flap Wheel 1"
Couldn't load pickup availability
Abrasive Hand Pad Light Duty 6 x 9"
Couldn't load pickup availability
2" Grey Finger Disc - 120 Grit
Couldn't load pickup availability
Steel Circular Flared Flat End Brush 1-1/2"
Couldn't load pickup availability
Twist Knot End Brush 1" Dia., .020" SS Wire Dia., 1/4" Shank
Couldn't load pickup availability
Steel Circular Flared End Brush 3"
Couldn't load pickup availability
Radiator Grille Nut M4.2-1.41
Couldn't load pickup availability
Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Rocker Molding Clip with Sealer Nylon Gray 12mm
Couldn't load pickup availability
Abrasive Hand Pad Commercial Grade 6 x 9"
Couldn't load pickup availability
Cryobit 1/4" Dia. Maintenance Drill Bit , 135o Split Point, W/ Flats
Couldn't load pickup availability
Twist-On Abrasive Disc 2"
Couldn't load pickup availability
Product Description
• Outlast standard brushes by at least 2-to-1• High tensile, heat-treated wire for excellent fatigue resistance and fast cutting capabilities
• Provide continuous cutting action, uniform surface contaminant removal and a smooth finish
• Quality is continuously checked during the manufacturing process; brush samples must remain 100% intact when tested at 120% of their rated operating speed
• Unique manufacturing process neatly arranges wire so each tuft contains the same count
• For spot facing, rubber or plastic flash removal, scale or slag removal, rust or paint removal, die, mold and tool polishing, cleaning or finishing recessed areas, weld cleaning, and carbon cleaning
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 89203 |
|---|---|
| Type | Crimped |
| Material | Steel |
| O.D. | 1/2 " |
| Wire Gauge | 0.020 " |
| Maximum RPM | 20,000 |
| Shank Size | 1/4 " |
| Shank Length | 7/8 " |
| UNSPSC #: | 27111907 |
| TAA Compliant: | Yes |
| Weight: | 0.13 lb |
Product Restrictions
