Terminal Crimp Frame
(Pack of
1.0)
• Professional tool incorporating a single frame with several interchangeable dies
• Full cycle ratchet with safety release
• High-quality electrical and mechanical crimps are made simultaneously
• Crimps meet or exceed industry standards
• Assures a positive mechanical and electrical crimp and ease of use
• Crimping dies can be easily switched with two screws
The die will slide out towards the front of the frame simply by loosening the two socket head screws and removing them.
To replace the die1. Simply extend the frame to its full open position.2. Close the frame approximately halfway. 3. Insert the die into the frame until it stops. All dies can be inserted only one way for the tool to close properly.4. Tighten the screws approximately halfway. 5. Close the frame to press the dies against each other. This helps to align the dies in the frame.6. Finish tightening the screws. 7. Frame and tool are complete and ready for use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Battery Terminal Crimper Tool For 6 to 4/0 Gauge
Couldn't load pickup availability
4GA/16mm Replacement Die
Couldn't load pickup availability
Terminal Crimping Tool with Die 26-16 AWG
Couldn't load pickup availability
Hands Free Butane Torch Self Igniting
Couldn't load pickup availability
Receptacle/GFCI Tester 120VAC
Couldn't load pickup availability
2GA/25mm Replacement Die
Couldn't load pickup availability
1/4" Shank 6 Piece Router Trimmer Tool Set
Couldn't load pickup availability
Chuck, Quick Change, 1/4 Hex"
Couldn't load pickup availability
7/32˝ x 6˝ Snap-Ring Tool Holder
Couldn't load pickup availability
Nylon Cable Tie 7-1/2" Black
Couldn't load pickup availability
Air Distributor Defroster Push-Type Retainer
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability
Razor Blade, Single Edge, High Carbon Steel
Couldn't load pickup availability
Twist-On Surface Conditioning Disc 2" Maroon
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 3/16"
Couldn't load pickup availability
Product Description
• Professional tool incorporating a single frame with several interchangeable dies• Full cycle ratchet with safety release
• High-quality electrical and mechanical crimps are made simultaneously
• Crimps meet or exceed industry standards
• Assures a positive mechanical and electrical crimp and ease of use
• Crimping dies can be easily switched with two screws
The die will slide out towards the front of the frame simply by loosening the two socket head screws and removing them.
To replace the die1. Simply extend the frame to its full open position.2. Close the frame approximately halfway. 3. Insert the die into the frame until it stops. All dies can be inserted only one way for the tool to close properly.4. Tighten the screws approximately halfway. 5. Close the frame to press the dies against each other. This helps to align the dies in the frame.6. Finish tightening the screws. 7. Frame and tool are complete and ready for use.
Technical Specifications
| Item#: | 95102 |
|---|---|
| Type | Crimp Die |
| Style | Terminal Connector Crimping System |
| Description | Frame Only |
| UNSPSC #: | 27111500 |
| TAA Compliant: | Yes |
| Weight: | 1.64 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
