Thick Wiggle Wire, 3/32" Diameter, 12 AWG, 12-13" Length, Mild Steel, Copper Coated, Approximately 30 Pieces Per lb
(Pack of
1)
SKU:1556086 Item#: 1556086
Wiggle Wire is used for crease pulling and rocker panel automotive body repair.
• Thick wire has approximately 30 pieces per 1 lb. package
1. Weld wire to the dent or crease over a series of points.
2. Connect a hook, slide hammer or other pulling tools to pull dents and creases out of panels.
3. Easy removal – breaks right off.
Couldn't load pickup availability
Catalog page#: 10-57
Frequently Bought Together
Shield Push-Type Retainer with Metal Insert
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability
Fiberglass Paint Booth Filter Pad
Couldn't load pickup availability
Non-Stick Plastic Mixing Board 12 x 12"
Couldn't load pickup availability
Disposable Mixing Sheet with Board
Couldn't load pickup availability
Shield Push-Type Retainer with Metal Insert
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability
Shield Push-Type Retainer with Metal Insert
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 37CP
Couldn't load pickup availability
Total Rubber Clean Silicone Free Rubber Cleaner
Couldn't load pickup availability
Flex-E-6115 Controlled Flow Seam Sealer
Couldn't load pickup availability
Fiberglass Paint Booth Filter Pad
Couldn't load pickup availability
Non-Stick Plastic Mixing Board 12 x 12"
Couldn't load pickup availability
Disposable Mixing Sheet with Board
Couldn't load pickup availability
Product Description
Wiggle Wire is used for crease pulling and rocker panel automotive body repair.• Thick wire has approximately 30 pieces per 1 lb. package
1. Weld wire to the dent or crease over a series of points.
2. Connect a hook, slide hammer or other pulling tools to pull dents and creases out of panels.
3. Easy removal – breaks right off.
Technical Specifications
| Item#: | 1556086 |
|---|---|
| Material | Mild Steel Copper Coated |
| Diameter | 3/32 (0.093) " |
| Description | Thick |
| Wire Length | 12" to 13 " |
| UNSPSC #: | 25172502 |
| TAA Compliant: | Yes |
| Weight: | 1.0 lb |
