TIG Welding Tungsten Electrode, Gold Tipped, 1.5% Lanthanated, 7" Length, 1/16"
(Pack of
10)
SKU:P14576 Item#: P14576
• Non-radioactive Lanthanum Tungsten TIG electrodes eliminate the potential of interference with special equipment and reduces rate of vaporization or burn-off
• Will operate with alternating current or direct current either polarity
• The addition of lanthanum also lowers the temperature at which the electrode emits electrons allowing the electrode to operate cooler so higher currents can be used
• Lanthanum improves arc initiation and arc stability
• Longer life
• Less contamination
• Length: 7" (18cm)
• Identification: gold tipped
• Meets AWS specifications for EWLa-2
NOTE: Use argon shielding gas with a gas lens collet body for optimum performance.
Frequently Bought Together
Bumper Radiator and Grille Drive Rivet 7mm Hole
Couldn't load pickup availability
Fender Bumper Shield Retainer 11/16"
Couldn't load pickup availability
Inner Fender Shield Attaching Clip Nylon Black
Couldn't load pickup availability
9V/HW20 TIG Welding Alumina Gas Cup #8
Couldn't load pickup availability
9V/HW20 TIG Welding Collet 3/32"
Couldn't load pickup availability
TIG Welding Tungsten Electrode 2% Ceriated 1/8"
Couldn't load pickup availability
AWS E71T-11 Carbon Steel MIG Flux Core Welding Wire .062" 33lb
Couldn't load pickup availability
AWS E71T-11 Carbon Steel MIG Flux Core Welding Wire .035" 2lb
Couldn't load pickup availability
Flint For Spring Loaded Trigger Torch Lighter
Couldn't load pickup availability
9V TIG Welding Short Torch Cap
Couldn't load pickup availability
9V/HW20 TIG Welding Alumina Gas Lens Cup #6
Couldn't load pickup availability
Copper Contact Tip
Couldn't load pickup availability
Product Description
• Non-radioactive Lanthanum Tungsten TIG electrodes eliminate the potential of interference with special equipment and reduces rate of vaporization or burn-off• Will operate with alternating current or direct current either polarity
• The addition of lanthanum also lowers the temperature at which the electrode emits electrons allowing the electrode to operate cooler so higher currents can be used
• Lanthanum improves arc initiation and arc stability
• Longer life
• Less contamination
• Length: 7" (18cm)
• Identification: gold tipped
• Meets AWS specifications for EWLa-2
NOTE: Use argon shielding gas with a gas lens collet body for optimum performance.
Technical Specifications
| Item#: | P14576 |
|---|---|
| Welding Process | TIG |
| Type | Lanthanated |
| Components | Tungsten Electrode |
| Diameter | 1/16 " |
| Length | 7 " |
| Description | 1.5% Lanthanated |
| UNSPSC #: | 23271700 |
| TAA Compliant: | No |
| Weight: | 0.23 lb |
