Tubeless Tire Snap-In Valve, 1-1/2" Length, 14" Rim Diameter, 0.453" Hole Diameter
(Pack of 25)

SKU:P40549 Item#: P40549

Kent®

• Threaded inside and out for retaining valve core and exterior protective cap
• Locating ring provides secure seating and sealing
• Compression seal and valve base mount flush with rim contour and permit flexing without dislodging valve
• Resists temperature extremes and surge inflating
• Conforms to OEM and Tire and Rim Association specifications

Check Availability

Quantity

Catalog page#: 5-33

Frequently Bought Together

Front Bumper Specialty Nut Steel M4.2-1.41

Fender Splash Shield Retainer Nylon 20mm

Molding Clip with Sealer Nylon White 11.5 x 21

Front Bumper Specialty Nut Steel M4.2-1.41

Fender Splash Shield Retainer Nylon 20mm

Molding Clip with Sealer Nylon White 11.5 x 21

Twist-On Mini Flap Disc 2"

Twist-On Mini Flap Disc 2"

Twist-On Mini Flap Disc 3"

Front Bumper Specialty Nut Steel M4.2-1.41

Fender Splash Shield Retainer Nylon 20mm

Molding Clip with Sealer Nylon White 11.5 x 21

Nylon Cable Tie 5-1/2" Black

Premium Nitrile Gloves, Black, 6 Mil, Large, 100/Box

Seam Sealing Tape 8mm x 26'

Premium Nitrile Gloves, Black, 6 Mil, Large, 100/Box

Rusty™ 3000 Brake Plate/High Temperature Lubricant

Premium Nitrile Gloves, Black, 6 Mil, X-Large, 100/Box

Reinforced Passenger Tire Patch 2 Ply 3"

Replacement Needle Shaft

Tire Repair Bias-Ply Chemical Cure Patch 3"

Standard Truck Valve Extension 2-1/4"

Tire Repair Valve Green Plastic Cap with Seal

Tubeless Tire Snap-In Valve 2"

Product Description

• Threaded inside and out for retaining valve core and exterior protective cap
• Locating ring provides secure seating and sealing
• Compression seal and valve base mount flush with rim contour and permit flexing without dislodging valve
• Resists temperature extremes and surge inflating
• Conforms to OEM and Tire and Rim Association specifications

Technical Specifications

Item#:	P40549
Type	Tubeless Tire Snap-in Valve
Category	Tire Repair
Group	Tire Valves
Size	1.5
Length	1-1/2 "
UNSPSC #:	25172502
TAA Compliant:	No
Weight:	0.58 lb

Suggested Products

Rear Bumper Cover Retainer Plastic 18mm

Bumper and Wheel Well Liner Push-Type Retainer

Fender Apron Drive Rivet 8mm Hole

Engine Under Cover Drive Rivet Plastic 7mm Hole

Cowl Bumper Fender Liner/Engine Under Cover Rivet

Front Fender Push-Type Retainer Nylon 20mm

Drive Rivet Nylon M8

Bumper Radiator and Grille Drive Rivet 7mm Hole

Bumper Push-Type Retainer Nylon 18mm

Push-Type Retainer Nylon 16 x 19mm

Bumper Fascia General Purpose Split Rivet 3/16"

Inner Fender Shield Attaching Clip Nylon Black

Your Recently Viewed Items