Wrapped Stem Tire Patch and Plug 1-5/8 x 3/16"
(Pack of 24.0)

Kent Automotive

• For use on radial and bias ply tires
• Designed for chemical or heat vulcanization
• Patch has gray vulcanizing gum with blue poly backing
• Stem portion is wrapped with gray vulcanizing gum
• No special insert tools required
• Prepare injury with carbide cutter, install from inside, pull through and cut off wire

Check Availability

Quantity

Catalog page#: 5-36

Frequently Bought Together

Front License Plate to Bumper Cover Split Rivet

Bumper Cover Push-Type Retainer Nylon 18mm

Hood Insulation Retaining Clip Nylon Black 10mm

Front License Plate to Bumper Cover Split Rivet

Bumper Cover Push-Type Retainer Nylon 18mm

Hood Insulation Retaining Clip Nylon Black 10mm

Bumper Drive Rivet Plastic 10mm Hole

Air Distributor Defroster Push-Type Retainer

Wheel Flare Molding Clip with Sealer Nylon

Carbide Brake Lathe Bit 3 Cutting Edges

BK1 Bearkat Safety Glasses

Windshield Wash Tablets

Butyl Windshield Tape 1/4" x 15'

Glossy Back Paper Floor Mat, 17" x 22"

Miniature Incandescent Bulb 12V 36CP

Tire Repair Prestige Digital Pressure Gauge

Tubeless Tire Valve 90°

Tire Repair Valve Extension Cap 1-1/4"

Tire Repair Center Over Injury Patch 3 x 4-3/4"

Tire Patch Ball Bearing Roller Stitcher

Tire Repair Center Over Injury Patch 1-3/4 x 3"

Product Description

• For use on radial and bias ply tires
• Designed for chemical or heat vulcanization
• Patch has gray vulcanizing gum with blue poly backing
• Stem portion is wrapped with gray vulcanizing gum
• No special insert tools required
• Prepare injury with carbide cutter, install from inside, pull through and cut off wire

Technical Specifications

Item#:	1425823
Type	Wrapped stem combination tire patch and plug
Patch Diameter	1-5/8 "
Quantity Per Package	24.0000
Injury Size	3/16 "
UNSPSC #:	25172502
TAA Compliant:	No
Weight:	0.51 lb

Product Restrictions

Suggested Products

Rear Bumper Cover Retainer Plastic 18mm

Bumper and Wheel Well Liner Push-Type Retainer

Woven Polyester Electrical Tape 19mm x 25m

Engine Under Cover Drive Rivet Plastic 7mm Hole

Bumper Fascia General Purpose Split Rivet 3/16"

Front Fender Push-Type Retainer Nylon 20mm

Fender Bumper Shield Retainer 11/16"

Fender Apron Drive Rivet 8mm Hole

Inner Fender Shield Attaching Clip Nylon Black

Specialty Rivet with Plastic Cap Aluminum 3.2mm

Rocker Molding Clip with Sealer Nylon Blue 17mm

Rocker Panel Molding Clip Nylon White 12 x 20mm

Your Recently Viewed Items