1204 4" DRILL PRESS VISECAM ACTION
(Pack of
1)
Simple push or pull on the center bar knob sets the jaw in position
Easy press locking lever cams the jaw ahead 3/32", existing a holding pressure that is adjustable from 400 to 1100 lbs
Recessed parallel steel jaw inserts level work, and can be removed to accommodate your jig and fixture components
The base is designed for clear through drilling applications
For added durability, bars and locking mechanisms are hardened and ground
The unique top locking lever can be raised or lowered to tighten or loosen against the workpiece
Frequently Bought Together

Copper Jaw Caps F/6" Jaw Width
Couldn't load pickup availability

0-8-1/4"Opng 400 Series C-Clamp
Couldn't load pickup availability

8" Wltn Cam Action Drill Press Vise
Couldn't load pickup availability

Pneumatic Flat Nose Peening Tool 4"
Couldn't load pickup availability

Pneumatic Needle Scaler Adapter Tool 9"
Couldn't load pickup availability

Pneumatic Peening Tool 6"
Couldn't load pickup availability

Hex Head Sheet Metal Screw with 16mm Washer Steel
Couldn't load pickup availability

Nylon Cable Tie 11-3/4" Black
Couldn't load pickup availability

Front Fender Push-Type Retainer Nylon 18mm
Couldn't load pickup availability

Zirconium Grain Locking Grinding Disc 2"
Couldn't load pickup availability

Cryobit 1/8" Dia. Maintenance Drill Bit , 135o Split Point, No Flats
Couldn't load pickup availability

Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability

5"Jaw Width Rubber Face Jaw Cap
Couldn't load pickup availability

Tradesman Vise, 4.5"
Couldn't load pickup availability

6" Shop Vise with Swivel Base
Couldn't load pickup availability
Product Description
Simple push or pull on the center bar knob sets the jaw in position Easy press locking lever cams the jaw ahead 3/32", existing a holding pressure that is adjustable from 400 to 1100 lbs
Recessed parallel steel jaw inserts level work, and can be removed to accommodate your jig and fixture components
The base is designed for clear through drilling applications
For added durability, bars and locking mechanisms are hardened and ground
The unique top locking lever can be raised or lowered to tighten or loosen against the workpiece
Technical Specifications
Item#: | 1224800 |
---|---|
Type | Drill Press Vise |
Jaw Opening | 4-11/16 " |
Jaw Width | 4 " |
Throat Depth | 1 5/16 " |
Jaw Material | Steel |
Material | Ductile Iron |
Locking Type | Cam Locking Mechanism |
Nut Type | Rapid Acting |
UPC | 662755043628 |
UNSPSC #: | 27000000 |
TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
