178 Outstanding Abrasion Resitance At High Temparature At 1400F Complex Carbides Polarity Dcep Harness 63-66Rc Number Of Passes 2
(Pack of
5)
• Ultra-Brade SD utilizes a complex carbide alloy system that provides outstanding abrasion resistance even at high temperatures.
• Tubular electrode design provides 90% deposition efficiency
• Reduces smoke by half compared to conventional hardfacing electrodes
• Runs at lower amperage — reduces distortion, weld dilution andmetal fatigue
• Hardness of up to 66 Rc, one layer can outlast two layers of competitive product
• Designed to withstand extreme temperature abrasion up to 1400˚F (760˚C)
• Not designed for impact resistance
• Hardness: 63-66 Rc (deposits will relief check crack readily) • Max deposit thickness: 2 layersCurrent: DCEP (DC+) or AC • Abrasion resistance: Excellent • ASTM G65 Procedure A (Dry sand rubber wheel abrasion test):- 10.51 mm3 volume loss- 0.072 gm mass loss • For comparison sintered tungsten carbide: 0.039 to 0.080 gm mass loss
Frequently Bought Together
7355 Carbide Hard Facing Stick Rod Electrode 1/4"
Couldn't load pickup availability
706 Hard Facing Buildup MIG Welding Wire 0.045"
Couldn't load pickup availability
7770 Hard Facing Buildup Stick Rod Electrode 1/8"
Couldn't load pickup availability
174 Gray High Abrasion Moderate Impact 1/8
Couldn't load pickup availability
7220 Carbide Hard Facing Stick Rod Electrode 3/8"
Couldn't load pickup availability
711 Carbide Hard Facing Stick Rod Electrode 5/32"
Couldn't load pickup availability
Drive Rivet Nylon M8
Couldn't load pickup availability
Inner Fender Shield Attaching Clip Nylon Black
Couldn't load pickup availability
Cowl Bumper Fender Liner/Engine Under Cover Rivet
Couldn't load pickup availability
Cronatron Welding Guide
Couldn't load pickup availability
Heat Stick 400F Degrees
Couldn't load pickup availability
710 Stainless Steel Electrode 3/32"
Couldn't load pickup availability
Product Description
• Ultra-Brade SD utilizes a complex carbide alloy system that provides outstanding abrasion resistance even at high temperatures.• Tubular electrode design provides 90% deposition efficiency
• Reduces smoke by half compared to conventional hardfacing electrodes
• Runs at lower amperage — reduces distortion, weld dilution andmetal fatigue
• Hardness of up to 66 Rc, one layer can outlast two layers of competitive product
• Designed to withstand extreme temperature abrasion up to 1400˚F (760˚C)
• Not designed for impact resistance
• Hardness: 63-66 Rc (deposits will relief check crack readily) • Max deposit thickness: 2 layersCurrent: DCEP (DC+) or AC • Abrasion resistance: Excellent • ASTM G65 Procedure A (Dry sand rubber wheel abrasion test):- 10.51 mm3 volume loss- 0.072 gm mass loss • For comparison sintered tungsten carbide: 0.039 to 0.080 gm mass loss
Technical Specifications
| Item#: | EG17800375 |
|---|---|
| Welding Process | Stick |
| Type | Electrode |
| Diameter | 3/8 " |
| Length | 18 " |
| Base Metal | Steel To Steel |
| Hardness | 63-66 HRC |
| Polarity | DCEP |
| UNSPSC #: | 23271810 |
| TAA Compliant: | Yes |
| Weight: | 6.17 lb |
