CryoBoost Cobalt Drill Bit, 17/64" Dia. W/Flats, Stepped Tipped, Gold Oxide Coating
(Pack of
1)
SKU:DY83621764 Item#: DY83621764
Cryogenically treated, new patented CryoBoost™ Cobalt stepped tip design cuts faster, lasts longer and starts holes easier than any other drill bit in the market. CryoBoost™ Cobalt bits are more heat resistant than high speed steel and are specifically designed for drilling very hard, abrasive material such as stainless steel, titanium and cast iron.
• Long Lasting - Stays sharp up to 4X longer compared to conventional and other specialty tip designs, allowing more holes per bit
• Easy Starting - The multi-stepped tip acts like a step drill, allowing for laser like holes through stainless steel, titanium and cast iron and prevents walking on curved surfaces
• Reduces Number of Tools Required - By eliminating the need to drill pilot holes projects can be completed faster using fewer tools
• Cryophase™ Treatment - The treatment enhances tool flexibility, provides longer tool life, and higher heat resistance
• 3-Flatted Shank - Allows bits to be used in cordless drills and with the 3-flat shank it won’t slip in keyless chucks
Specifications
• Tip Design: Stepped tip
• Hardness: 65-68Rc
• Temperature Resistance: 1112°F
• Material: Cobalt
• Surface: Gold-Oxide with bright tip
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Cryobit 1/8" Dia. Maintenance Drill Bit , 135o Split Point, No Flats
$0.00
Couldn't load pickup availability
Twist-On Abrasive Disc 3"
$0.00
Couldn't load pickup availability
General Purpose Jobber Length Drill Bit HSS 4.8mm
$0.00
Couldn't load pickup availability
Cryoboost Drill Bit, 3/16" Dia. W/Flats
$0.00
Couldn't load pickup availability
Jobber Length Drill Bit HSS 1/8"
$0.00
Couldn't load pickup availability
Cryoboost Drill Bit, 1/4" Dia. W/Flats
$0.00
Couldn't load pickup availability
Jobber Length Drill Bit HSS 13/32"
$0.00
Couldn't load pickup availability
Jobber Length Drill Bit HSS 1/2"
$0.00
Couldn't load pickup availability
Cryobit 8.5MM Maintenance Drill Bit , 135o Split Point, No Flats
$0.00
Couldn't load pickup availability
DTM Primer Tan
$0.00
Couldn't load pickup availability
Adhesive-Back Shim Stock 7/16 x 3/4" x 30'
$0.00
Couldn't load pickup availability
LOCTITE PRISM 426 20G
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Radiator Grille Nut M4.2-1.41
$0.00
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 2CP
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
12" Auto-Adjust Pliers
$0.00
Couldn't load pickup availability
11Pc Lock and Load Hammer Set
$0.00
Couldn't load pickup availability
Product Description
Cryogenically treated, new patented CryoBoost™ Cobalt stepped tip design cuts faster, lasts longer and starts holes easier than any other drill bit in the market. CryoBoost™ Cobalt bits are more heat resistant than high speed steel and are specifically designed for drilling very hard, abrasive material such as stainless steel, titanium and cast iron.• Long Lasting - Stays sharp up to 4X longer compared to conventional and other specialty tip designs, allowing more holes per bit
• Easy Starting - The multi-stepped tip acts like a step drill, allowing for laser like holes through stainless steel, titanium and cast iron and prevents walking on curved surfaces
• Reduces Number of Tools Required - By eliminating the need to drill pilot holes projects can be completed faster using fewer tools
• Cryophase™ Treatment - The treatment enhances tool flexibility, provides longer tool life, and higher heat resistance
• 3-Flatted Shank - Allows bits to be used in cordless drills and with the 3-flat shank it won’t slip in keyless chucks
Specifications
• Tip Design: Stepped tip
• Hardness: 65-68Rc
• Temperature Resistance: 1112°F
• Material: Cobalt
• Surface: Gold-Oxide with bright tip
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY83621764 |
|---|---|
| Drill Length | Jobber |
| Drill Type | Fractional |
| Type | Heavy Duty |
| Material | Cobalt |
| Finish | Gold |
| Diameter | 17/64 " |
| Decimal Equivalent | 0.2656 " |
| Point | Stepped Tip |
| Flute Length | 2-7/8 " |
| Flute Type | Spiral |
| Shank | Straight |
| Flats | 3 |
| Overall Length | 4-1/8 " |
| UNSPSC #: | 27111559 |
| TAA Compliant: | No |
| Weight: | 0.045 lb |
