CryoBore 1-7/16" Dia. Annular Cutter, 1-3/16" Cutting Depth
(Pack of
1)
SKU:DY81864050 Item#: DY81864050
• Fast - Advanced multiple cutting edges have a special geometry and kerf angle that reduces loading and increases cutting speeds
• Lower Heat - The thinner moly/cobalt cutting edges produce less frictional heat
• Long Life - Cryophase™ treatment extends tool life in tough cutting like structural and truck frame steel without pre-drilling
• Weldon shank fits most mag drills
Specifications
• Cryophase™: Thermal cycling cryogenic treatment
• Material: Modified moly/cobalt tool steel
• Cutting Tooth Hardness: 64-65Rc
Note: Pins not included with individual cutters.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
CryoBore 7/8" Carbide Tooth Annular Cutter, 2" Cutting Depth
$0.00
Couldn't load pickup availability
HSS Annular Cutter 7/16"
$0.00
Couldn't load pickup availability
CryoBore 1-7/16" Dia. Annular Cutter, 2-3/8" Cutting Depth
$0.00
Couldn't load pickup availability
1-3/8" Dia. Annular Cutter, 1" Cutting Depth, Pin Not Included
$0.00
Couldn't load pickup availability
7/16" Dia. Annular Cutter, 1" Cutting Depth, Pin Not Included
$0.00
Couldn't load pickup availability
HSS Annular Cutter 1-3/16"
$0.00
Couldn't load pickup availability
Reinforced Mini Cut-Off Wheel 3"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 1/4" (M6.5)
$0.00
Couldn't load pickup availability
Aluminum Oxide Grain Locking Grinding Disc 2"
$0.00
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 11.5 x 21
$0.00
Couldn't load pickup availability
Front Rear Bumper Specialty Rivet 3.2mm
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
10Pc SAE Mini Combination Wrench Set
$0.00
Couldn't load pickup availability
1/8" - 1/2 " Cryonitride Spiral Fluted Step Drill - 1/4" Shank
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit
$0.00
Couldn't load pickup availability
Product Description
• Fast - Advanced multiple cutting edges have a special geometry and kerf angle that reduces loading and increases cutting speeds• Lower Heat - The thinner moly/cobalt cutting edges produce less frictional heat
• Long Life - Cryophase™ treatment extends tool life in tough cutting like structural and truck frame steel without pre-drilling
• Weldon shank fits most mag drills
Specifications
• Cryophase™: Thermal cycling cryogenic treatment
• Material: Modified moly/cobalt tool steel
• Cutting Tooth Hardness: 64-65Rc
Note: Pins not included with individual cutters.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY81864050 |
|---|---|
| Cutting Diameter | 1-7/16 " |
| Depth of Cut | 1-3/16 " |
| Tooth Material | Moly/Cobalt |
| UNSPSC #: | 23241600 |
| TAA Compliant: | No |
| Weight: | 0.405 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
