Screw Extractor, Removes Stripped-Out and Damaged Screws Quickly and Easily, Reusable, #2, Number 6 to 10
(Pack of
1)
SKU:63213 Item#: 63213
• Reusable – just clean off chips and lubricate
• Removes stripped-out and damaged screws quickly and easily
• Removes most screw types including Phillips, TORX®, square drive, Pozidriv® and most tamper-proof screws
• For use in variable speed hand drills set in reverse
Burnishing:1. Insert remover end of GRABIT® directly into drill.2. Set drill in reverse (counterclockwise).3. Place burnishing end of tool into damaged screw; slowly clean inside screw head until smooth.Removing:1. Insert burnishing end of GRABIT® directly into drill; removing end is now showing.2. Maintain reverse setting (counterclockwise).3. Place remover end of tool into smooth screw head.4. Apply firm downward pressure; drill at very low speed.5. Remover end of GRABIT® will thread into the head and remove the screw.
NOTE: Burnishing tool end is not to be used to drill holes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Zirconium Grain Locking Grinding Disc 2"
$0.00
Couldn't load pickup availability
Reinforced Mini Cut-Off Wheel 3"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 3/8" (M10)
$0.00
Couldn't load pickup availability
Screw Extractor Spline #6
$0.00
Couldn't load pickup availability
Straight Fluted Screw Extractor 5/16"
$0.00
Couldn't load pickup availability
Screw Extractor Spline #9
$0.00
Couldn't load pickup availability
Bumper Fascia Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Wheel Opening Drive Rivet Aluminum 5/32"
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 15mm
$0.00
Couldn't load pickup availability
Rethreading Die M10 x 1.5
$0.00
Couldn't load pickup availability
Broken Bolt Power Extractor Kit 4Pcs
$0.00
Couldn't load pickup availability
Rethreading Die M12 x 1.75
$0.00
Couldn't load pickup availability
Razor Blade Single Edge w/Notch
$0.00
Couldn't load pickup availability
Abrasive Bristle Wire Belt Steel 23mm
$0.00
Couldn't load pickup availability
Polymer Wheel Rubber Eraser 30mm
$0.00
Couldn't load pickup availability
Product Description
• Reusable – just clean off chips and lubricate• Removes stripped-out and damaged screws quickly and easily
• Removes most screw types including Phillips, TORX®, square drive, Pozidriv® and most tamper-proof screws
• For use in variable speed hand drills set in reverse
Burnishing:1. Insert remover end of GRABIT® directly into drill.2. Set drill in reverse (counterclockwise).3. Place burnishing end of tool into damaged screw; slowly clean inside screw head until smooth.Removing:1. Insert burnishing end of GRABIT® directly into drill; removing end is now showing.2. Maintain reverse setting (counterclockwise).3. Place remover end of tool into smooth screw head.4. Apply firm downward pressure; drill at very low speed.5. Remover end of GRABIT® will thread into the head and remove the screw.
NOTE: Burnishing tool end is not to be used to drill holes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 63213 |
|---|---|
| Manufacturer Model #: | 8502P |
| Type | Screw Remover |
| Industry Number | 2 |
| For Sizes | No. 6 - No. 10 |
| UNSPSC #: | 27111709 |
| TAA Compliant: | No |
| Weight: | 0.04 lb |
