DOT Compression Elbow Male 45° Brass 3/8 x 1/8"
(Pack of
2)
Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing
Meets D.O.T. FMVSS 571.106
Temperature range: 40°F to +200°F (40°C to +93°C)
Exceeds pressure requirements of automotive air brake systems
Typical applications include air brake systems, air control and gauge lines
Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together

Parker DOT Compression - Nylon Tubing Union 5/8x5/8
Couldn't load pickup availability

Parker DOT Compression - Nylon Male Run Tee 1/4x1/8x1/4
Couldn't load pickup availability

DOT Compression Elbow Male 90° Brass 5/8 x 3/4"
Couldn't load pickup availability

DOT Compression Connector Male Brass 3/8 x 1/2"
Couldn't load pickup availability

DOT Compression Sleeve Brass 3/8"
Couldn't load pickup availability

DOT Compression Sleeve Brass 3/8"
Couldn't load pickup availability

Mini Push Type Grease Gun with Steel Barrel
Couldn't load pickup availability

Union, 3/4"
Couldn't load pickup availability

Parker DOT Compression - Nylon Tubing FemaleConnector 3/8x3/8
Couldn't load pickup availability

Crimp-On Hose Coupling 1/2" x 1/2-14
Couldn't load pickup availability

SAE R16S Hydraulic Hose Rubber 0.81" x 50'
Couldn't load pickup availability

Hydraulic Union 3/8-18 x 3/8-18
Couldn't load pickup availability

Wheel Flare Molding Clip with Sealer Nylon
Couldn't load pickup availability

Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability

Front Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Product Description
Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing Meets D.O.T. FMVSS 571.106
Temperature range: 40°F to +200°F (40°C to +93°C)
Exceeds pressure requirements of automotive air brake systems
Typical applications include air brake systems, air control and gauge lines
Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Technical Specifications
Item#: | 96879 |
---|---|
Class | Air Brake Ftgs/Tubing/Accessories |
Fitting Type | Compression - Nylon Tubing |
Style | DOT |
Material | Brass |
Configuration | Male Elbow 45 Degrees |
Connection Type A x B | Tube x Pipe |
Fitting Dimension A | 3/8 " |
Fitting Dimension B | 1/8-27 |
Size | 3/8TX1/8P |
UNSPSC #: | 25171700 |
TAA Compliant: | No |
Weight: | 0.19 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
