High-Density Flap Disc 4-1/2"
(Pack of
1.0)
• Zirconium grain – phenolic backing
• Grind, blend, clean and finish in one step
• Discs last 30% to 40% longer than standard flap discs
• A thicker disc with larger flaps conforms to curved and irregular surfaces and produces a consistent finish
• Phenolic backing will not scratch workpiece during operation
• For use on 4-1/2" right-angle grinders
• For use on all metal surfaces
• Blending and finishing on contoured or flat surfaces
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Catalog Page#: 3-16
Frequently Bought Together
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
Cryoslash 3-5/8" x 1/2" x 0.025" Air Saw Blade 32 TPI
Couldn't load pickup availability
Double End Drill Bit 1/8"
Couldn't load pickup availability
Phenolic Backing Plate Flap Disc 4-1/2"
Couldn't load pickup availability
Flap Disc 4-1/2"
Couldn't load pickup availability
Phenolic Backing Plate Flap Disc 4-1/2"
Couldn't load pickup availability
Flexible Flap Disc 4-1/2"
Couldn't load pickup availability
Mini Flap Disc 3"
Couldn't load pickup availability
Flexible Flap Disc 4-1/2"
Couldn't load pickup availability
Push-Type Retainer Nylon 16 x 19mm
Couldn't load pickup availability
Cowl Bumper Fender Liner/Engine Under Cover Rivet
Couldn't load pickup availability
Rocker Panel Molding Clip Nylon White 12 x 20mm
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 3/16"
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-3/4" (M8)
Couldn't load pickup availability
Double End Drill Bit 5/32"
Couldn't load pickup availability
Product Description
• Zirconium grain – phenolic backing• Grind, blend, clean and finish in one step
• Discs last 30% to 40% longer than standard flap discs
• A thicker disc with larger flaps conforms to curved and irregular surfaces and produces a consistent finish
• Phenolic backing will not scratch workpiece during operation
• For use on 4-1/2" right-angle grinders
• For use on all metal surfaces
• Blending and finishing on contoured or flat surfaces
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 16570 |
|---|---|
| Type | High Density |
| Diameter | 4-1/2 " |
| Wheel Type | 27 |
| Grit | 40 |
| Arbor Size | 5/8-11 " |
| Grain | Zirconium |
| Maximum RPM | 12,000 |
| Backing | Phenolic |
| Aluminum Approved | Yes |
| UNSPSC #: | 31191506 |
| TAA Compliant: | Yes |
| Weight: | 0.47 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
