Combination Drill-Tap, High Speed Steel, 135° Split Point, #10-24, 0.625" Tap Length, 2-5/8" Overall Length
(Pack of
1)
• Create the hole and thread in a single operation – no center drilling or punching required
• Tapered neck design significantly reduces drill and tap breakage
• 135° split point permits hole and thread to be cut at high speeds
• Superior strength and durability provided by high molybdenum, high speed steel
• Functional black and gold surface treatment holds lubricant for smoother drilling
• Hex shank works with quick change chucks
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Catalog page#: 10-70
Frequently Bought Together
Cryo-Drap #6-32 Drill & Tap Combo, 135o Split Point, W/Flats
Couldn't load pickup availability
HSS Combination Drill-Tap M7
Couldn't load pickup availability
Combination Drill-Tap Set #6 to 1/2"
Couldn't load pickup availability
Cryobit 1/8" Dia. Maintenance Drill Bit , 135o Split Point, No Flats
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
Zirconium Grain Locking Grinding Disc 2"
Couldn't load pickup availability
Front Fender Liner Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Carbon Steel Replacement Hand Tap M12 x 1.75
Couldn't load pickup availability
4-Flute HSS Taper Hand Tap 3/8-16
Couldn't load pickup availability
3-Flute HSS Taper Hand Tap 3-48
Couldn't load pickup availability
Razor Blade Single Edge w/Notch
Couldn't load pickup availability
0.5 HP Reciprocating Air Saw
Couldn't load pickup availability
Pneumatic Impact Wrench, 1/2 Drive Max Torque 730 lbs
Couldn't load pickup availability
Product Description
• Create the hole and thread in a single operation – no center drilling or punching required• Tapered neck design significantly reduces drill and tap breakage
• 135° split point permits hole and thread to be cut at high speeds
• Superior strength and durability provided by high molybdenum, high speed steel
• Functional black and gold surface treatment holds lubricant for smoother drilling
• Hex shank works with quick change chucks
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 1148330 |
|---|---|
| Type | Combination Drill Tap |
| Point | 135° Split |
| Diameter | #10 |
| Pitch | 24 |
| Tap Length | 0.6250 " |
| Material Thickness | 3/8 " |
| Shank | 1/4 " |
| Overall Length | 2-5/8 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.02 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
