HSS Combination Drill-Tap M12
(Pack of
1.0)
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole
• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
HSS Combination Drill-Tap 1/2-20
Couldn't load pickup availability
HSS Combination Drill-Tap 3/8-16
Couldn't load pickup availability
HSS Combination Drill-Tap 1/4-20
Couldn't load pickup availability
2" Grey Finger Disc - 120 Grit
Couldn't load pickup availability
Twist Knot Wire Wheel 3" Dia., .014" Wire Dia., 1/4" Shank
Couldn't load pickup availability
Nylon Cable Tie 11-3/4" Black
Couldn't load pickup availability
Rocker Molding Clip with Sealer Nylon Gray 12mm
Couldn't load pickup availability
Cryotap 5/16"-18 Tri-Pak
Couldn't load pickup availability
Cryotap M10 x 1.5 Metric Bottoming Hand Tap
Couldn't load pickup availability
Razor Blade Plastic
Couldn't load pickup availability
Reinforced Mini Cut-Off Wheel 3"
Couldn't load pickup availability
Product Description
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 27385 |
|---|---|
| Type | Combination Drill Tap |
| Point | 118° Split |
| Diameter | M12 |
| Pitch | 1.75 mm |
| Tap Length | 0.9400 " |
| Material Thickness | 1 " |
| Material | HSS |
| Overall Length | 4.40 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.13 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
