Combination Drill-Tap, M1 High Speed Steel, 118° Split Point, 3/8"-24, 0.75" Tap Length, 4.07" Overall Length
(Pack of
1)
SKU:59930 Item#: 59930
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole
• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
HSS Combination Drill-Tap 1/2-20
$0.00
Couldn't load pickup availability
HSS Combination Drill-Tap 3/8-16
$0.00
Couldn't load pickup availability
Cryobit 1/8" Dia. Maintenance Drill Bit , 135o Split Point, No Flats
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 3/8" (M10)
$0.00
Couldn't load pickup availability
Anti-Rattle/Squeak BRS Tape 10mm x 10'
$0.00
Couldn't load pickup availability
NANOSKIN® AutoScrub™ Wash Mitt Medium
$0.00
Couldn't load pickup availability
Bumper Fascia Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 2CP
$0.00
Couldn't load pickup availability
Pilotdrive Cryotap M10 x 1.5 Metric Tri-Pak, Taper, Plug, Bottoming
$0.00
Couldn't load pickup availability
Cryotap #10-24 Tri-Pak
$0.00
Couldn't load pickup availability
Razor Blade Single Edge w/Notch
$0.00
Couldn't load pickup availability
Compact Cordless Circular Saw Charging Bundle
$0.00
Couldn't load pickup availability
Product Description
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 59930 |
|---|---|
| Type | Combination Drill Tap |
| Point | 118° Split |
| Diameter | 3/8 " |
| Pitch | 24 |
| Tap Length | 0.7500 " |
| Material Thickness | 3/4 " |
| Material | HSS |
| Overall Length | 4.07 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.09 lb |
